Hi,Is there a pre-production tests plan from cisco to validate that a new UCS setup is A-OK?I found some stuff on google. But nothing from cisco.Thanks for any help.Stephane.
Hi,Is there a pre-production tests plan from cisco to validate that a new UCS setup is A-OK?I found some stuff on google. But nothing from cisco.Thanks for any help.Stephane.
Hi Guys,I want to know whether UCS support jumbo frames when booting from SAN. Presently I am trying to boot my Blades from iSCSI with jumbo frame enabled.the storage is netapp sitting on two seprate vlans.Any help will greatly appreciated.Thanks
Hello folks,I have had a real live setup where there was a coling problem.all cooling went down and the user did not spend mony on survaling the tempeture.The UCS chassis shut down automaticly when it was to hot and booted it self when there was cold...
I have configured multiple UCSM with UCS Central. I want credential of each UCSM through UCS Central.Please let me know, how to do thatRegards,Shashi
i have server Cisco UCS B200 M2 mounted on it local hard disk A03-D300GA2, when the server start the initailization read hard throgh HBA 0 and when install ESXI on it the Hard Disk appears as Remote Storage.so anyone can advice why is that and how re...
I am aware of the benefits as published in the literature about the benefits of VM-FEX and SR-IOV but would like some clarifications/opinione from anyone who is currently running this sort of setup.OS: Windows 2012 hyper-vUCSM: 2.1(2a)I under the fol...
New Release available here -> http://developer.cisco.com/web/unifiedcomputing/ucsemulatordownload Mainly addresses some issues with Cloupia connections. Many of us internally are using the emulator to demo Cloupia and this fixes some issues with that...
Hello,I am looking for some reference material that would detail the UCS profiles and requirements to install Windows 2012 with/without hyper-v on bare-metal B200-M3 blades. These blades will boot from SAN.Thanks for any info.....
Hello We have some UCS C260 and we are trying to configure trigger level for events on the UCS and also if we can send the event alerts to email accountsIs there a way to do that on the C260? or should we try a different approach?
Hi,Please I need your help to know if I can create vhbas of 8GB speed with mezzanine card M81KR.Thanks,
Hi all,Most of our blades ( B230 M2s) are diskless and they boot from SAN. However i have a specific requirement where it is required to boot from local disk.I do not have any disks in the B230M2 disk slots but i do have some B200M1 blades which have...
Hello experts,The customer wants to know what function of the card UCS-FI-DL2 ( UCS 6248 Layer 2 Daughter Card ) have. Can anybody tell me?Is it like a simply layer 2 switch 's function ? Thank a lot !
HelloI'm looking to install a cpu (UCS-CPU-E5-2643) in a UCS C220 M3. According to the documentation I should be using UCS-CPU-GREASE2 for the thermal grease. The CPU came with 2 syringes - one with a blue cap and one with red. I've searched through ...
Hello, I just stumbled on a odd behaviour. I currently have a small ucs domain with 2 chassis. I just saw that I am unable to see some statistics counters on one of the two chassis. Example, the fan current speed is not even displayed, as you can s...
Hello,We have Cisco UCS 5108 with 2 Fabric Interconnect 6120XP. We are running VMware on my Cisco Blades. I need connect my Dell TL 4000 LTO3 tape library to this Cisco UCS so that I can configure one virtual machine with EMC Networker software to ta...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-15-2024 11:16 AM | ||
08-15-2024 08:03 AM | ||
08-14-2024 07:32 AM | ||
08-02-2024 03:36 AM | ||
07-23-2024 08:42 AM |