Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Where can I find information about the Phone Wipe feature, specially which phones are supported? I cannot find any official notes. I have already searched through Release Notes, Features Guides and Bulk Administratin guides, but got nothing. Thanks e...
instead of using a phone device, i would like to know if I could use a cti route point device
Hi guys.I'm seeing some problems to transfer external calls after I received them. I press the transfer button, I can digit the destination number, but when I try transfer (pressing the transfer button again) return the message "reach maximum calls"....
Hi guys, I'm trying to go a little bit deeper with Sip and I have a doubt on early offer and delay offer. My question is this: what is the default offer type (early or delayed) for a phone registered on Cucm?I know Cucm sends DO by default on Sip Tru...
I am trying to use CP-7821 with SIP-78xx.12-5-1SR2-2 firmware and freePBX. I got status messages error verifying Config info.
When defining the MGCP call-agent Should the call agent ALWAYS be the Subscriber? is the any reason ever when this would be the publisher?
Can someone please explain WHY you would run this command on VGW 1. #no ip address trusted authenticate ?Surely you WANT ip address authenticate?? 2. if I did run this command#no ip address trusted authenticateWould I still MUST define a trusted lis...
Hi allI have a cisco 2811 router with pvdm2-32 and vwic2- 4FX0 and IOS version of Router is 15.01 when I use this router as a fxo gateway : in outgoing calls , the Co line is occupying but no connection to called number is happening , just some ...
Is there an Ignore Softkey for the 8821? Decline softkey send the call to voicemail and what the customer wants is that the call should then roll to the next phone in queue.
Hi, I just received new Cisco 8861 but I don't see the Bluetooth menu and by the way I'm not able to have web access. What can I do? Thank You in advance Didier
How can I find a CUCM Failover event in the console logs on 8851 and 8865 phones? What are some key words to search?I want to find out if a certain group of phones fail over from a primary CUCM subscriber to the secondary subscriber. I have seen the ...
I'm having difficulty in getting this up and running. I have this current configuration. When dialing 112233, nothing happens. Conference Now ConfigurationConference Now IVR Directory Number 112233Route PartitionP_Phones Descri...
hi all Is there anyway to change the time formate 12/24 for specific phone not server wide ?
Hi, I have a Cisco IP Phone 7942 and after hard reset (3491672850*#) its only sending LLDP/CDP packets to the network instead of DHCP requests. I can see this using wireshark:33 28.910209 Cisco_96:89:37 LLDP_Multicast LLDP 117 TTL = 180 System Name =...
Hi GuysI want to change our 7960G phones from SCCP to SIP have donwloaded all the required files and uploaded to the router 2821The debug commands show the phone asking for the files but router responding with no such file found, why is this happenin...
