Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I need to add a 04 or a 09 depending on the calling number and called number. This is because we a using a single SIP trunk for multiple area codes, so in the example of a phone that belongs in a state with a prefix of 4 and another phone in a state ...
I have a CUCM, Conductor, TelePresence Server setup to handle video conferencing for Video Phones like DX650 and 99xx video phones. This setup is done to handle multi layout in the video phones during multi party call. This is working perfectly for...
Is it real to configure two sip providers on CUBE HA (active-standby) model?
Dear All, I am making call out, but call is getting disconnected .please let me know the reason Thank you in advance.. Feb 20 09:38:05.654: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: Received: INVITE sip:2002@10.106.115.201 SIP/2.0 Via: SIP/2.0/U...
Hi Guys, in my project I have SIP line and 16 analog lines, and two CUCM and two VG. I decided to make SIP trunk for main and 16 analoug for redundant. I created two route groups one for SIP and one for Analog, then I created route list for redundan...
3905 support voice mail or not ?
There is a power shutdown activity going to happen end of this month in the data center. My applications are running on ESXi (includes CUCM, CUCXN, UCCX). Though the activity will be done off business hours. Do I need to take any extra measures? W...
Dear All, I would like to forward all the calls to my cell phone when i am not in office. Actually currently we have scenario's like we have multiple extensions and all of them are individually configured and for all of them we configured the group...
Hello, I Just bought an IP Phone 8851 and would like to use it with an Asterisk PBX (SIP). As such I have read that I need to flash it with the SIP image. So my question here is, where can I find this SIP image for this specific phone? and are there...
We have a few 7962G phones that have gone bad and would like to upgrade to the 8841 phone which only allows SIP based protocol. Is there any issues installing these phones on the CME when it is already using SCCP as protocol for existing phones. Ro...
Hello, I am setting up a new VoIP site, site has a 2911 onsite with 4 pots connected to fxo ports. We have the system back ended at corp, the CUCM config looks good and using DNA for testing shows calls hitting the proper RL for the site but we ar...
Hello, can I use the Cisco 7821 without any Cisco Hardware or Software? I have only the SIP-Account from my provider. regards, kuemmel
Some years ago I worked on a fax issue.I tried to get a 100% fax transmissions on a long distance geographical VoIP link.I tried several QoS settings without success.I got this result only using a "strong" rate limit on all non VoIP traffic. At this ...
My manager is attempting to connect a computer the PC port of his 8861 phone but he is not getting connectivity. He plugged the same device directly into the wall and got connectivity. I checked the config and saw that "PC port" is enabled. I then re...
I have an CP-9951 with PoE and I want to use the usb port just for charging my Iphone but as soon as I connect it apers a message in the CP-9951 "iphone has been detected but is disabled by the administrator" is there any way to enable it? I can't fi...
