Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have several 7970 phones (and a couple of 796x phones) working just fine. The network infrastructure is in place to provide dhcp responses and a tftp server to provide firmware. This is all proven to work with many other phones.However, I have one ...
I am using a 2821 router. I have the latest IOS. It appears to be CME version 8.6. I've been having a heck of a time getting my phones to work with it. I have a 7961 and 7941. I need to get the SIP firmware working so I can practice for the CCIE...
Hi guys, I have encountered a problem with "busy name". In our organization we have something like thisCUCM 10.5----SIP trunk----PBX1----SIPQ trunk----PBX2So, when CUCM user is busy and some user from PBX2 make a call to this user, CUCM send standard...
Hi expertsMay I know caused for %VOICE_IEC-3-GW: C SCRIPTS: Internal Error (Interface busy)?Hugo Oct 22 13:23:20 10.10.10.10 820: 000816: Oct 22 2015 13:25:02.133 CHN: %VOICE_IEC-3-GW: C SCRIPTS: Internal Error (Interface busy): IEC=1.1.182.11.26.0 o...
i have line group but i didnt add any Available DN/Route Partition to line group
Hi All,I have a common problem with FXO disconnect. The FXO integrated to Pabx. Using router 2801/2811 with IOS version c2800nm-advipservicesk9-mz.150-1.M3.bin. I already tried all of possible configuration in this forum but still not work. FYI, I'm ...
We are trying to connect a Call Manager 8.6.2SU3 with Vocera and Nurse Call systems via SIP Trunks. The vendor has requested the following Route Pattern: 2051169760.!*!#When we try to dial a number such as: 2051169760338*6678770# we hear "Your call ...
Hello All, For some reasons, the customer has disabled the Dialed number analyzer feature in CUCM.They need to enable it now and just wanted to ask you whether enabling DNA feature will impact anything in CUCM.ThanksSathya
hi team, i have issues in my cucm v 7.02, if someone call my number some time they cant get ring back sound.
I am performing a jump upgrade. IP addresses remain the same. All new servers are pre-loaded and ready to go. I have already upgraded all the device firmware to the proper versions so when the old servers are unplugged and the new ones are plugged in...
Hi, I have a strange error on C2921 router configured as SIP to SIP CUBE, SRST, ConfBridge and transcoder. On console there is constantly showing this message:SIP: Trying to parse unsupported attribute at media levelSo I started with debu...
Hello,Looking for some help. We have a site that stresses it's data circuit daily and consistently. We have QoS in place. They have a local PRI. It just came to my attention that there are intermittent call quality issues (robotic sound, choppy, ...
Hello All,We are running UCCX 7.1 (SR5), UCM 7.1.5.34085-1, 4 Voice Gateways 12.4(19b) .We have been experiencing some calls into our call center that when answered by our CSR's there is one way audio. This happens only on a handful of the calls but...
Hi Guys, I am trying to upgrade firmware IP Phone 9971 in CallManager Express 9.x, but, not worked. Appear the follow error message:%Tar checksum error in tftp://10.93.2.11/cmterm-9971.9-4-2SR2-2.k3.tar I used the link below as reference: http://www...
Hello everyone, we have CUCM v. 9.1.1.20000-5 and we are trying to achive the following configuration for a small subset of IP Phones (let's say 3): a) Incoming calls can make Phone 1 ring or all three phones ring together (like a shared line), both ...
