Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Is there a bug with this or some other reason why a shared line on a SCCP IP Communicator device ignores what ring setting I have applied for a shared line? If I share the same line on a desk phone, the Ring Once, Flash Only, Disable settings work ...
hello everyone,i am tryin to enable the call transfer feature on my cme, i do not know what i am doing wrong.i enabled the sccp and stcapp.i have one 2901. the config file is attached.Regards.sorry for my english.
Hi, I have a VOIP setup with some Cisco 7940G IP phones registering with a external Voip provider, I don't have a Call Manager, I'm using an OpenSource firewall (PFSense) with SIPROXd to eliminate the Nat problem between my Ip phones and the provide...
Hi,I'm having problem registering my two CP-7841-K9 phone with CUCM v10.5. I have 2 CP-7942G, 2 CP-7945G and 1 CP-8831-K9 and they are register without any problem. It's just the 2 CP-7941-K9 that are causing problem.
in CUCM 9.1, I'm trying to setup a speed-dial/shortcut button for a external conference call that users often use. We currently have a setup for another conference number using " * " button at the moment. So, when user hit " * " button, it will dia...
Hi, Quick question about licensing. I have 30 basic licenses for CUCM, and 32 7821 phones registered. Of course I get the error message now saying that I have exceeded the limit. If I delete those 2 phones, remove them from the network and re-sync th...
Hello All..I have a request to upgrade cucm 8.6.2 VM into 10.5.2. We have new be7k UCS server for this upgrade.Current CUCM 8.6.2 is also in VM and we want to upgrade it into 10.5.2 in new BE7K UCS server. I just want to make sure the steps to upgrad...
PROBLEM:-I want incoming call to my DID Number of siptrunk1 didlogic, will be forwarded to extension 801.The same thing to siptrunk2 hoiio, will be forwarded to extension 801 as wellCurrently no ringing tone when someone call my DID number to either ...
I have setup a new site in CUCM 10.5 that is using a H.323 gateway for inbound/outbound calls. The users are reporting to me that sometimes when they try to dial out they receive an incoming call before they are finished dialing. They explained that ...
The directory my GUI files are in have spaces in it. CME 10.5.0 GUI. How do you set the path with spaces in the directory? I get a blnak page when accessing the GUI. AT
All,To license a DX80 endpoint on UCM 10.5, do I need a TP ROOM or CUWL license? Or both!ThanksD
We are starting to deploy 8800 Series phones and would like to know if it is possible to change the default ringtone on these phones via CUCM and not from the phone itself.The factory default ringtone is not appropriate for a professional environment...
Hi,I'm trying to understand how the Maximum hunt timer works in Hunt pilot configuration in CUCM.My test scenario is as below;I have an IP phone (4931) ringing in to a hunt pilot 404921 , which is pointing towards a Line group with two other IP phone...
Hi all, we have a single node CUCM running 9.1.1.20000-5. I added cmterm-88xx-sip.10-2-2-16.cop for 88xx-series support, rebooted the CUCM but I am still unable to add an 88XX IP phone. The documentation does not seem to say anything about a minimum ...
All,Here is the scenario, I am migrating users from a Active Directory domain called 'DOMAIN1' to a domain called 'DOMAIN2'.User is migrated in AD, then in CUCM their End User account is renamed from 'username1' to '1username'.They then sign into Jab...
