Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello All, Could any one of you guide me if i can use Cisco IP Communicator on MAC OS Machine as well. My CME is using SCCP and i do not want to use SIP, is there any way or any IP Soft Phone Available which work on MAC. I really Appreciate the Reply...
how fix this High Traffic Try Again Later error message in CUCM 7.1.3?
Hi Guys,My Customer have the CUCM 8.6.2 and would like know if the IP phone model GXP2100 (SIP) is supported for this version. I search in the Cisco site and not found this information. Is there any documentation Cisco about this?Thanks,Wilson
Hello, What is DSCP and QOS and how is used with switches, phones, etc. Also, what does it mean by DSCP trust boundaries can I have an example of this?Thanks,
From time to time, and mostly with international calls, the gateway is disconnecting the calls: Oct 2 08:47:00: ISDN Se0/0/1:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x59D3 Cause i = 0x80FF - Interworking error; unspecified If you insist...
Hi, I am researching and call control is still very hazy for me. How can we make a control (say monthly) credits for each user?eg: "User1 can make just 50min/50U$ outside calls per month." Thanks!
Can we change/edit the xmldefault.cnf.xml file(default config file) for cisco ip phones in tftp server or in CUCM?
Hello All, During an investigation Application user RMCM was found to be deleted from CUCM as per CUCM logs but the first issue of agents unable to log into ACD queue was reported 2 weeks later following a publisher reboot, I am trying to understand ...
The Cisco Supervisor application "shakes" the list of agents list when user is logged in to the Agent.It used to do that only when he was on the phone, but now it does it all the time when he is logged in to the Agent.
Hello,What exactly is meant with trust boundary regarding dscp or cos. for example if your have a computer connected to a ip phone connected to access switch which is connected to a core switch how does dscp trust boundary work is in this scenario? ...
I have a unity connection 8.x cluster.My requirement is that when the unity connection transfer the call to user,the caller alway listen " Transffering to XXXX at extension xxxxx "Now i want to disable this message from playing,Is there any way we ca...
Our organization is transitioning Centrex lines regularly to VoIP. To be able to work ahead, it would be nice to configure these phones with their numbers ahead of time without impacting other VoIP users' ability to make calls to that number while i...
We have a 3825ISR with (2) 2-port WICs (V2). Because of internal company/subsidiaries, WIC0 has 2 full PRIs outbound to our carrier's 3945 (dial-peer 9.T), and WIC1 has 1 full PRI outbound to separate carrier 2921 (dial-peer 8.T, with second WIC1 po...
Hi, I have a BE6000 server with CUCM 9.x and Unity Connection all on 1 VM. My problem is that Unity just stopped answering calls and this affects Calls forwarded to Vmail and also calling Vmail directly. Just rings. List of troubleshooting done: ...
We have one location that is complaining that when making or receiving a call, when answered, there is no audio for about 3-5 seconds. This happens on random calls throughout the day and extremely inconsistently. This can happen with calls onsite o...
