Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi, I have an issue with my Call manager version 8.6 su3. CPU spiking to 100% I noticed the following process interrupted during the process (PDFLUSH#1,Kjournald and Kjournald#1). Thank you for the help.
Hi,i want to know if it is possible to get an Information when an mailbox is locked because of to much wrong logins.I can see it when i go the the Mailbox but it would be nice to get an Syslog message or an email.Is there anything feature for this?Be...
I've received recent complaints that (sometimes) when outside callers call one of our main offices and select one of the options that it doesn't transfer them and they have to call back. We initially called BS on it when we tested this several times...
Hi expert,I've CIPC with free-form device name configured and registered to CUCM 8.6. Would like to know which device mac the CIPC use when it fallback to SRST? The VG configured with CME-SRST, and the provision method is auto none.Thanks
I have done this before, so I'm not sure what the problem is this time. I've been working on this CME/CUE router all day. It's Sunday and I have a headache.When I try to run the CUE Initialization Wizard it says "Login to CUCME as an administrator ...
Hi,Looking to see if a solution exists to test PSTN and/or Toll Free services for outage. These services would all route thru our existing CUCM. I have alerts setup to alert me if a gateway goes down or if the services are exhausted. We have a num...
Hi,I have succeeded in setting up BLF and able to see when the phone rings and pick up the call for the configured extensions. However, when I push the iDivert key, the called is sent to MY voicemail. I understand with enhanced iDivert, it is suppose...
Hi,I am struggling with a strange problem. I have noticed that in our CUCM some of our ATA devices started to have connectivity issues. If you ping it 5 requests are ok and 2,3 time out. All basic network troubleshooting is done an...
Hi there,I am doing voice translation for the following scenario but I believe it can be done better way. So please suggest me how can I do this in one rule rather than two separate.Basically I wanted to do digit manipulation for the range of 0172629...
Hello - looking for some help on a SIP trunk configuration between the 2 devices. Currently we are running CUCM 9.1 with Avaya Session Manager 6.3. We are having issues with the call completing from the CS 1000 to the CUCM. Below are the session trac...
Hello,I have been trying to help a business friend of mine who purchased Lync 2013 interconnect a Cisco 2911 ISR he is using to control his PRI. He only wants to use this for inbound calls from the PRI through the ISR to the SIP trunk and to Lync.I ...
We get excessive DHCP traffic every day due to bug CSCtr56885. Rebooting the phones as a band-aid has gotten old. The bug has been around for quite some time. How are others dealing with this? Considering we have a couple hundred 7937 phones,...
All of a sudden a few phones are now seeming to have reset issues when connected to our development call manager 10.0.1A few people have access to mess around with this but so far all that I have asked have told me they have changed "nothing" but I t...
Situation:Six 9971 phones + 7925 registered in CME 9.0.SIP Trunk to TSP.7925 working great, 9971 drop calls after 20 sec, no matter internal calls or external to TSP.When HOLD key pressed call droped immediately.Already tried to change CME version (8...
I am trying to assist my uncle with setup of a PRI on their CME router. I've created the pri-group and I can see the channels are good and the call comes in, but always end in fast busy. I do not see the voice-port populating after created the pri-...
