Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello All,Unable to call forward number from cisco phone but im able to dial/reach the same number from the same Cisco phone. Only call forward is not working. Line, Device and Callforward CSS are same. Is there something need to do in service parame...
So I pull up a doc on cisco's website about SRST in call manager version 9 and it shows that 28XX and 38XX series routers are not supported. Now it didnt say incompatible, so I put it together in a lab and it still works fine. Basically what I read i...
Dear Team, When a user presses 6060 Translation pattern call routed on PSTN number 80XXXXXXXXXX with secondary dial-toneIs there a way to disable the secondary dial-tone in CallManager 8.x so that when a user presses 6060 Translation pattern will no...
Hi,Is there a feature in CUCM9.1 to have a call return to the transferer after a blind transfer to an extension which does not pick up ? No VM involved.thanks in advancePaul.
Hi,Running CUCM-BE version 8.6. Let me know how many DLU's are required for each 3905 IP Phones.Regards,Krishna
Hi, Need a guide that will help me prevent the message "Memory full, run clear telephony-service ephone-attempted-registrations to refresh the storage" from being logged into the 2911 logs. When we do a sh log, that is the only message we get to see ...
Scenario is like that, Phone-A(1111) calls to Phone-B(2222), whereas on Phone-B, CallFarwarding is set to be some PSTN Number, Lets suppose 903333333333. When Phone-A calls to Phone-B, it show on Phone-A display that " To: 903333333333 ", This looks...
Hi,I have this problem, when call is initiated from public number to my desk phone ( RDP number is set to my cell phone) , mobile connect would not initiate call to my cell phone number. I can call that cell phone number from my desk phone. Also...
I need a link for a good video that shows how to sent up an Auto Attendant with CUCM 7.13 and Unity Connections. I need to set one up for a client and can not find a good straight forward document or video on Youtube. Can someone help me?
Dear Experts.I have a problem with cisco ATA187 and SIP ISP, DTMF and Fax not working together.Scenario:CUCM9.1 -->ATA187 --> SIP TRUNK -->CUBE-->SIP ISP. ATA187 -> DP-G711 -> MTP SIP TRUNK uncheck -> Fax ok -> DTMF no ok.ATA187 -> DP-G729 -> MTP SI...
Have an issue with calls being routed to a particular cell phone number . Checked the dial - out code for a US location -- 9-1-XXXXXXXXXX and 1-XXXXXXXXXX -- both used . Checked the RPattern configuration and it seem to have a specific x[2-9]xxxxxxx...
Could somebody explain me the purpose of "Cisco Telephony Service Provider" plugin in CUCM? I have tried to serach for it and could not get anything useful.
Good Evening all,I am trying to initaite a session onto the CUE module of my UC 520. It just continuously says waiting.I have tried clearing the session but no luck. I can ping the service module and everything seems to be setup correctly.Does anyone...
We are running CallManager 7.0.2. I added around 20 phones (7962) and 3 vg224’s to a new voip site. When I perform a Find and List Phones – Find Phones where Call Search Space – begins with – sequoia, I only see 10 of the phones (7962). I noticed ...
Hi Everyone, Have a CME running version 15.1. One of the voice-ports (specifically, voice-port 2/0/10) on the router acting as number 1832. The users want this number to also ring on two other phones, both of which are IP based (7911 and 7921). Ca...
