IP Telephony and Phones

Hi,How do I change the time/date format on a 3905? I've added the NTP server to their Date/Time Group and reset the phone - no joy!Any ideas?Rich

voice translation-rule 1 rule 1 /^/ /0/!voice translation-rule 2 rule 1 /^/ /00/!voice translation-rule 3 rule 1 /^/ /000/!voice translation-rule 4 rule 1 /^/ /0000/!voice translation-rule 5 rule 1 /^786320\(...\)/ /1\1/!!voice translation-profile in...

Is there a way using the Bulk Admin tool to assign all of my End Users to the: Standard CCM End UsersStandard CTI EnabledGroups? Also, since I sync with Active Directory for all new users is there a way to auto assign them to these groups going forwa...

I had a remote site lose WAN connectivity over the weekend, and SRST kicked in successfully.  After the outage was over however, the gateway (2811) did not switch back to the CUCM cluster.  show ccm-manager reported all nodes in the cluster as "down"...

I have an H323 voice GW which connected to the PSTN via a T-1 PRI. Intermittently, callers from the IP telephony network receive re-order tone when dialing out. Debug ISDN q931 indicates GW sending to PSTN that network resources are unavailable:ISDN ...

Hello,we have an issue with our CUE. Internal calls to the CUE and leaving a voicemail for someone from a internal deskphone works fine. Only external calls will be terminated with a fast busy tone. I couldn’t find much information about CUE interact...

I have two Qs in CUCM 7.X related to phone customizationFirst:How I disable directory service in the phone so when I press directory, it will show "no direcotry service".Second:How I can delete one specific ring tone in one phone . Example; delete "a...

Hi,I have migrated from cisco unity 5 to cisco unity connection 8.6 and after hearing messages in unity connection migrated from unity the caller ID (number or name ) are not in the message, for the new message it works fine I can here the message an...

Hi all,I have an unity connection system with multiple forwarded routing rules, I receive warnings for all of my forwarding rules stating that they have one or more conditions and that I should reconfigure them if necessary.. They all have the condit...

Does anyone know what the maximum amount of entries are (per user) for the personal address book feature.

where can i use answer-address command?. This is used in pots or voip dial-peer?dial-peer voice 1 pots  translation-profile incoming srst_123456 answer-address 6320940!Thanks