Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hey guys,as the subject said, we are using ip communicator through a checkpoint VPN going off to a SIP trunk in order to place calls. Internally everything is fine, but once im on the VPN and i place a call, the other person cannot hear me but i can ...
Hello All,I have a IP PHone 7942G that is working fine with CME with SIP Protocol.Now I would like to configure manually the IP Phone 7942G to register to Asterisk Server.But I can not edit SIP Configuration in the IP Phone. I'm already typed **#, an...
Hello,Today I upgraded my Call Manager from 6.1.2 to 6.1.4(a)su2 and from there began an upgrade to 6.1.5 su2. The file loads successfully, the MD5 checksum is correct and it begins the upgrade process. During the upgrade it fails and I get the erro...
Hi everyone, I got a configuration that worked fine untill it upgraded. We have 16 fxo port configured in CUCM 6.1 (gateway ios is Version 12.4(15)T10) it all working fine. But when we upgraded the number of fxo ports 16 to 24 there comes t...
Hi all I have CUCM 7I used Cisoc OS Administratrtion, Settings>NTP Servers. and I added the server which is cisco router.but if ssh the serve and use the command:utils ntp status , I can find the the server Synchronized for local not for NTP.ntpd (pi...
Guys,first time configuring PRI for voice and am having a little issue with the telco. they are asking me to turn up my D channel but have no idea of how this should be done.My basic config is as follows controller T1 0/0/0 framing esf linecode b8zs ...
Trying to do a softwareware upgrade for callmanager system version 6.0.1.3000-7 using the GUI and through the ftp server but each time it fails and "Error on this page " is displayed on the browser.When I click on the error link i get the info below...
CUCM (CallManager) 6.0(1a) (6.0.1.2000-3).Anyone have issues with some web pages in OS Administration saying "Error on Page" in the lower left corner of Internet Explorer 6?For instance? Settings -> IP -> Ethernet. Trying to change the IP address g...
Hi,In CUCME you can create an XML file and use it for Local Speed Dial. How do I acheive this in CUCM 7.1? I have a customer that wants local Speed dials common to all users in a department. Can I use the same XML files I have for CUCME, How do I get...
I have a PRI into a 2921 router and need to split into DiD to phones and DID/FAX to a TCL script. The PRI is sending 4 digits....so to get to phones...that's easy...do nothing!!!The fax numbers are in the same range so i need a way to identify them ...
We are experiencing intermittent issues (individual site perspective) that are consistently (from a WAN perspective) occuring on our network where an analog device will cease functioning. We have four different and distinctly different devices that ...
I have SIP trunk from SIP provider, I configured the VG to run CUBE I can place calls to PSTN. but if some body called from PSTN to IP phone and the user answers the call the calling party still hear the ringing tone while the IP phone shows connecte...
Hi,Im hoping someone can help me out here.We have been taksed with defining a global dial plan as a suggestion in our company. The problem is we have no authority to enforce it and we are using different systems throughout the globe. Everything we su...
Hello,how can i retrieve a specific VM for a specific user on CUC version 1.2 . on regular unity i usually go to the exchange server . thanks in advance.
Hi,I have an H.323 gateway that I'm trying to get caller ID working correctly on. I've got it working to where the number and name display while the phone is ringing but when the user picks up the phone only the name displays and the number is not t...
