Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,Has anyone out there got a working implementation of CME with the 7937G conference station?I have a customer running CME4.2 and they have just purchased a 7937 handset, however that handset type is not an option when adding the station in the CLI....
Hi,Unable to use Pickup for calls from a Hunt Pilot. I've tried the 'CSCsb42763 ' but Pickup Group is still not visible under Hunt Pilot. Does CCM need a reboot after applying the Bug Fix?CheersRich
Hi all,REcently i have tried to configure Supervisory disconnect under a BRI card (using the Voice-port creted virtuall) but the command is no longer listed like in the FXO configuration.SO if i don't have my CPTONE country listed and there is no su...
Hi to all,I have a CME ver 4.2 on 2811 with CUE 3.1, all works fine, but I want to configure the "Live Record" feature.I follow this guide and it seems easy:http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_1/administration/guide/voicemail...
when i connect Cisco IPC to callmanager 4.1.3 sr3 i am getting a error Unable to initialize support for cisco emergency responder service. Please consult your system administrator.The Cisco ip communicator version is 2.1.3.0after geting the error al...
Hi,i am still having conferncing problem on cme. I donno if it is a miss configuration or something is missing.attached is the config as well as error of show sccpGood day
Hello,I'm using CCM6 with a Voip call.The VoIP Call use G729 codec.The internal call use G711.I use a IOS MTP with G729 Codec.If I use the Default DevicePool,I cannot call through the VoIP.So I've created a new Device pool that use another region wit...
Hi everybody. Thanks in advance for your help.I am having problems with my router. The "csim start num" command does not work in it.I am attaching the output from that command:csim start 1584csim: called number = 1584, loop count = 1 ping count = 0cs...
I am in the middle of setting up a voice gateway and when I try to set up the voice-port, I get "Invalid input". Applicable config:controller T1 0/0/0 framing esf linecode b8zs cablelength short 110 pri-group timeslots 1-24interface Serial0/0/0:23 no...
Hello,what's the purpose of the ACL ?regards
Hi,I am planning to upgrade from Unity 4.2(1) to Unity 5 (Exchange 2007 support is needed). To make the least disruption to our production environment I will be building two separate Unity servers and installing Unity 5 on them.Both will be working a...
Hi all,I want to ask about CDR raw files comparison between CCM 5.x and CCM 6.xIs there any difference between the CDR raw files of the two versions ? May be someone who has implemented both versions can show me what are the differences?For third par...
Hi,I have Unity 4.2 with UM setup and Exchange 2003.I have to edit a few Subscribers to reference different Exchange alias. SA GUI does not allow that, none of the Unity Depot tools seem to allow it and the only way I have seen doing it is to edit S...
If you change administrator passwords in Call Manager, can that break XML directory services?
Hi, I have Trixbox PBX and Cisco 3725 Router. Both of them are in same lan. My router has E1 interface that is connected to LG-PBX. My LG-PBX agent can call Trixbox agent directly over PRI. But when trixbox user try to call LG-PBX agent i take "SIP/...
| User | Count |
|---|---|
| 8 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
