Hi Support Community This query on delayed and early offer early offer is not relating to CUBE or any sort of SIP Trunk or ITSP it is purely related to CUCM and IP phone to IP phone call flow. It is not a setting I have ever changed as IP phone t...
Forum Posts
On our 7821 phones, whenever Do Not Disturb is enabled, there is a "DND is turned on" message on the phone's display. It's there for the entire time that DND is enabled and doesn't go away until you disable DND. On our 8811 phones, when enabling DND,...
Does Cisco call manager support avaya and huawei ip phones? How to check for compatibility?
Resolved! Update background image on Cisco Phones.
Hi guys, Is it possible to force Cisco Phones to re-download background image file from CUCM 11.5??? I need to update company logo, so I've made a new file with the same name as old one and replaced it in TFTP. However, phones don't want to re-down...
We're running CUCM 10.5 and the Park feature is not working on 8851 phones. Calls are reverting as soon as I hit "Park". Our 8841 phones work fine with this feature and both types have the same device configurations. What was done so far: 1. Firmwa...
Resolved! Cisco Call Manager ver12
Dear Support, I have cisco call amnger ver 12 with Cisco 4300 voice gateway, i need to configure cisco voice gateway for that am looking configuration guide. We have sip line from local ISP. can you help me to share the require configuration which ...
Folks, I am a bit confused about the following statement from CAT 9300 QOS guide. Note that the default trust mode for a port is DSCP based. The trust mode ‘falls back’ to CoS if the incoming packet is a pure Layer 2 packet. what is cl...
Dear Professional, I have Cisco Call Manager express 9.1 in cisco 2951 ISR Router and my question is what specific model cisco IP phones are support by default in CME 9.1 without loading their firmware in call manager and can any one confirm these ...
Hi all, I would like get the details from CUCM page using SOAPUI about a given persons call history using AXLtoolkit SOAP API 11.5 I would like to be able to retrieve calls made and received. Can anyone please suggest or even better show an exa...
Hi Expert, I am wondering if it is possible to configure a tranformation as explained below. USER A's DN is 500 and it's PSTN number is 20430000. I want know if it is possible to configure a transformation so that if USER B ( DN 501) rather than...
Resolved! Hardware not supported - CUCM - VMWare
Hi friendsI trying to install a CUCM 8.6 2a in a UCS : C210M2 , but appears this error message:Critical Error:The hardware you are using is not supported for this product. Installation will now halt.What could be the problem?Roni
Hi,I was wondering what UWL license do third party SIP phones (basic and advance) require?STANDARD or PROFESSIONALThanks in advance
Dear Community: Some SRND documents (11.x and 12.x) state that Enhances Location Call Admission Control (ELCAC) does support Extension Mobility Cross Cluster (EMCC) but Feature and Service Guide from 11.x and 12.x and 10.x claims that ELCAC does n...
Hi, is there a way to do run sql select .... and show only first 5 or 10 lines ? Is there way to send break when SQL select is running ? Thank you
