I have a couple of switches that are trunked via a LAN cable from another switch. I noticed that these switches sometimes have a hard time to SSH into. I get the error: "Connection timed out". After a while and a few tries I can connect just fine. I ...
I am working on a eem script and struggling to display a script output line by line on a syslog. It show mab all sum and the result is usually like this : Interface Client Mac Authen Status Gi1/0/1 aaaa.bbbb.cccc SUCCESS Tw2/0/2 cccc.dddd.eeee FAILE...
Hi, Tech geeks. I have C9124AXE-E wireless AP and i have upgraded it to EWC by installing 17.9.5 version. now i have connected 4 external antennas with this AP / EWC. what i am facing is unable to get my 5ghz ssid operational, its operational status ...
I am working on connecting some upgraded circuits from our ISP and am having a hard time navigating the dual links that were ordered. I'm working with Catalyst 9300s running 17.5 and am trying to connect both links through my routers. They are dual 6...
Hi everyone,I'm trying to configure, on GNS3, the DHCP snooping+IPSG, the last one just for IP filtering.Anyway, when "ip verify source" is enabled on a port, hosts traffic is dropped regardless the IP DHCP snooping table is apparently correctly fill...
What is the max client count that is recommended for cisco 9120 and 9130 AP operating on wifi 6 with which I can except a decent performance.Could someone please help me with this query?
Hello Team, we tried to retrieve all switches in stack using Cisco Prime Infrastructure 3.10, but we are out of solution. From the Tool, we tried the Report Launchpad/ Device / Detailed Hardware / Switches and hubs, but without success. If we use the...
Dear Community,There have 2 kind different of AnyConnect agent version on ISE.Also have 2 kind of Complain Module as well.There are 2 kindly of Cisco AnyConnect agent on ISE where Client Provisioning Policy. 1. AnyConnect 4.x with its Compliance Modu...
Hello Team, need your help to understand the route selection when we using MPLS and inside the MPLS there is OSPF protocol. I am getting confuse when doing traceroute from CE1 to CE2 another site and it is taking the path which i am not understanding...
Our remote workers utilize RAVPN by installing AnyConnect software on their work machines. To distinguish users based on their groups, I employ Group Policy. While the authentication process is functioning correctly, an issue arises where any author...
Trying to find out what replaces the "magctl rbac external_auth_fallback enable" command on 2.3.7.0 and if it's still needed. Generally looking for any CLI information on 2.3.7 since it seems to have changed.
Hi All, I was looking for Terraform scripts to deploy the Cisco SD-WAN control components in Azure. I found this DevNet repo : terraform-viptela It does not seem to be up to date: Master branch has not been updated since 2022Cloud branch has been up...