Hello,I am working on some Fortinet's and for anyone that has connected Fortinet's to Cisco ISE using tacacs+ I could really do with some help.TACACS+ > Active Directory > Separate Read Only group and Read/Write GroupArticle that I am using to config...
As the fixed releases have not been pointed out in the bug, to enable the threat detection feature use the following versions: 9.16 version train -> supported from 9.16(4)67 and newer versions within this specific train.9.18 version train -> suppor...
Hi all,it's some time ago when I designed a larger wireless infrastructure in an industrial/warehouse environment. Back then it was standard to use APs with external antennas to meet alle the challenges (high ceilings eg 7-15m, very long floors with ...
Just seeking your advice and you input. what you will do if you are in my shoe.I have been in network for about 6years and current role is deployment and implementation in network.I am currently working in an MSP as a design engineer. we design netwo...
Dear All,In one of our IPSEC VPN , We are having issues in FTP, when client is trying to access a FTP server in AWS cloud. while having captures and system trace we found that at snort ,the route lookup is not taking correct egress zone instead it ta...
Hi all,My customer have a WLC 9800-L with software version 16.12.2sNow, they're having a problem with WLC. Their WLC will stop working suddenly.At that time, i cannot ping or telnet to WLC. WLC must to reboot (un-plug and plug power cable) to working...
Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 23, 2024 through Friday, October 4, 2024. Our colleagues Arpita Dash, Prateek Upadhyay and Udhay R. will be waiting to...
Recently i have competed IOS upgradation of cat 9300 switch after upgradation i got error like package is missing.when i checked more package.conf file all files are present in file nothing is missing still getting error.Also when i checked sh boot s...
Hello, we are not able to define a working regular expression in Cisco Secure Email Dictionaries UI. What is the correct syntax to achieve regex filtering with dictionaries in the UI? We've tried so far: 'firstname surname'/firstname surname//firstna...
Hello, I’m not at all familiar with any of the intricacies in any way and really am just requesting a simple version answer for this please. I just want to know which asa image file I need to use and what adsm image to use in order for the firepower ...
Hi dear community,I am facing an issue with the following setup :Ping is not OK for the BGP EVPN VPWS Service (Vlan / EVC 20).Here is the configuration of the involed PE :Cisco PE ISR1111:interface GigabitEthernet0/0/1 no ip address negotiation aut...
Hello Team,i tried to install the new version 1.7.0 on two different ubuntu systems. One for the radkit-service / One for radkit client.I used the installation script.If I want to register the radkit-service i will get the error message below. (I hav...
Hello Team,I have a topology as below; Site A is the primary site, site B is the secondary site.I have an afrinic IP of 110.110.110.0/24.I use 110.110.110.10 as my local peer to ipsec vpn clients.On ftds,on both sites i use the same afrinic IP; 110.1...
hi, can anyone please help advise how to find out the maintenance contract based on the switch serial number? I used the following tool to check warranty status, but can't find the contract number and the details of the warranty, thanks in advance.De...