Unified Communications Infrastructure

Hello All,I just went through the process on CUCM Serviceability page to configure a SNMP Trap destination. When I configured it I applied it to all Nodes, created a community string ("cucmtrap!") and restarted the 2 services required to apply the co...

Hello,I want to make this configurationWe have a comercial departament that will have an System Call Handler (9800) with a messageDial 1 to leave message (Distribution List)Dial 2 to talk to the operatorThis is workingOn the phones of the comercial d...

Dear Experts,Please help me to find the part no. of CME for making BOM. In CME 10.5 datasheet there is no the part no. I've got.Hope there are many experts to resolve this.I'm waiting for your reply.Thanks in advance. RegardsAhmed

Hi allWhen I run This AXL query , I get a result such as DID, user, firstname,lastname run sql SELECT distinct np1.dnorpattern, np1.calledpartytransformationmask, eu.userid, eu.firstname, eu.middlename, eu.lastname FROM Device d join DeviceNumPlanMap...

Hi guys, I need to buy Cisco Unity Connection 8.6 with mailbox license for voice mail service, and the Cisco distributer asked me the part Number of existing server and existing licenses. My question is how can I get those information from my server?...

Dear associates,I have Cisco Vg224 working as SIP router (sipv2). I'm confused on applying translate rule on some voice ports. but still not working. Im trying to allow some voice ports to call outside the network by forward calls to CUCM using sip t...

Here is the scenario :-IP Phone B - set to No Answer internal to Voice Mail.IP Phone A calling IP Phone B .  IP phone B does not answer and call forwards to voice mail.Then IP Phone A hears  " Enter Your Pin followed by # "  , IP phone A dials his pi...

Does the BE6000S support attendant console?Does the BE6000S support SX10? Thanks

Hello,We are running CUCM 4.2 and we want to change the Off-net Access Code from 9 to 8.  The reason is, we have a lot of accidental 911 calls.  8 isn't used for any of our internal extensions, so it shouldn't be an issue there. Can someone tell me i...

In looking at my Cisco Unified Reporting, after a recent upgrade of CUCM from 8.6.2.23900-9 to 8.6.2.23900-10, I fond that My phones have a mismatched load.The documentation points out that this report exists, but I cannot find any source that talks ...