Unified Communications Infrastructure

Resolved! Is it possible to Backup CUCM with FTP instead of SFTP - Disaster Recovery configuration

On our WAN, we have WAAS (wan accelerators) in place that accelerate and de-duplicate data. When SFTP is used across the WAN, it completely bypasses the WAAS. Is it possible to use FTP instead of SFTP, so the WAAS can accelerate the CUCM backups?Sa...

cisco express way with jabber

Hi,We are planning integration CUCM with Cisco expressway for VPN less Jabber.But have few queries:a) Can Cisco expressway E be implemented on stick in DMZ zone with static NAT with public IP.?b) Is it must to have certification given by public autho...

Resolved! CSS & PT Question

Hi EveryoneI have several sites that I'm getting rid of some older CUCM 4.3 boxes and I have a question about CSS and PT. Currently none of the sites are connected by to a PUB & SUB setup, all the sites are independent of each other but when I remove...

CUPS one AD domain but multiple email domains.

Hi,In our company we bought a Cisco BE6000 and I’ve been assigned the job to configure all the appliances. I only have some experience with the CUCM appliance but they also want to use the Cisco Jabber functionality and they would like to use the cur...

Resolved! Is it possible to set up WebEx meetings via a dial-in Telephone User Interface?

As per the title really - is it possible to set up WebEx meetings via an IVR?I am expecting the answer to be no but just want to check that I have not missed anything.

CUCM / CUP / CUC 10.5 not compatible with UCS C210M ?

Hi Community.As I see in the Compatibility Matrix the UCS C210M is not listed under CUCM / CUP / CUC 10.5.What does that mean the installation will fail? We're using the CUCM / CUP / CUC for our own little office (6 Phones) and using now CUCM / CUP /...

Prime Collab. Assurance Upgrade 10.0 to 10.5 / Device Work Center empty

Dear community,I have the strange behavior, that whole device work center is empty after I had upgraded to 10.5. No more call managers, unity connection or phones available.A rediscover or deleting and adding a new credential policy doesn't bring the...

CUCM : SSO for End User (OpenAM)

Hello,Running CUCM 8.6.2, I try to activate the SSO module for user accessing the end user configuration page and a CTI home made application writte in Java.I use the following document for referecne : http://www.cisco.com/en/US/docs/voice_ip_comm/cu...

Forward to voicemail prompts to sign in

I apologize for the trivial issue, but I am a Unity Connection newbie trying to fix an issue. After a call is ignored and forwarded to voicemail, Unity prompts the caller to enter a PIN rather than leave a message for the called user. When the PIN is...

Resolved! Installing RTMT Tool for 10 Clusters and 10 Unity Servers

Hello, My question is in regards to the recommended hardware specifications for installing RTMT. I know that each CUCM cluster I have requires its own installation of RTMT and that Unity is also a seperate installation. Cisco is recommending that y...

Setting up Hunt Group using an extension number instead of a pilot number

Hi Guys,I would like to set up a hunt group. My question is can I use a real extension number assigned to a phone to be a pilot number instead of creating a new pilot number. The requirements are if no one is answering a call to an extension 1000 (e...

Resolved! Cisco Unified CM Administration - Administrator password reset error

I have a Cisco Unified Communication Manager 9.x VM to which I can login to the shell. I want to reset the Cisco Unified CM Administration administrator password. But when I give the "utils reset_ui_administrator_password" command I am getting the er...

Resolved! Device Pool Question

Hi EveryoneI'm setting up some device pools for my job because we are about to have our remote regions connect across the WAN to our CUCM SUB. Initally all the phones at my location were in the default DP and now that I created a DP for my location i...

Visual voice mail Failover

Hi All, We have a cluster of Publisher and Subscriber of Unity connection with cluster of CUCMsVisual voice mail is configured with two hunt pilot number and configured web services ports in Unity connection correctly. The other day our publisher uni...

Resolved! Unity Connection - PUB/SUB which should be primary?

We have a PUB/SUB environment for our Unity cluster (Unity Connection 8.x). Our vendor set up the cluster to have the Publisher as the Primary. We were having issues with MWI, so he made the Subscriber the Primary. This didn't clear up the MWI iss...

Unified Communications Infrastructure

Forum Posts

Resolved! Is it possible to Backup CUCM with FTP instead of SFTP - Disaster Recovery configuration

cisco express way with jabber

Resolved! CSS & PT Question

CUPS one AD domain but multiple email domains.

Resolved! Is it possible to set up WebEx meetings via a dial-in Telephone User Interface?

CUCM / CUP / CUC 10.5 not compatible with UCS C210M ?

Prime Collab. Assurance Upgrade 10.0 to 10.5 / Device Work Center empty

CUCM : SSO for End User (OpenAM)

Forward to voicemail prompts to sign in

Resolved! Installing RTMT Tool for 10 Clusters and 10 Unity Servers

Setting up Hunt Group using an extension number instead of a pilot number

Resolved! Cisco Unified CM Administration - Administrator password reset error

Resolved! Device Pool Question

Visual voice mail Failover

Resolved! Unity Connection - PUB/SUB which should be primary?

Cisco UCS M5 and CSSM compability /lifecycle in future ALMA releases

Jabber cached credentials

Subject: Looking for Experts on Automated Scheduled Call Forwarding in

Cube in direct routing configuration, adjusting revocation-check

Switching to fix the VAPT issue

how jabber only chat use ?

Adding P-RTP-Stat header to the BYE and 200 messages for call stats

Analog Trunk between TWO PABX System

Unity Connection version 15.0 upgrade via data export Subscriber issue

CME Integration with Unity Connection using SIP, MWI not sending