Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Is there a good QoS monitoring tool for monitoring voice quality issues other than Wireshark? We have a centralized CUCM 11.x cluster with over 100 remote sites connected either through MPLS or dmvpn. Those remote sites use centralized SIP trunk for ...
Hi Everybody I am planning to run CUCM v10.5 behind a Cisco 2951 as system gateway. Because I have Cisco 7912 phones in my network, I have to have some phones under CME and some phones under CUCM. In this way, I thought that I have to setup IVR on C...
Hi guys, Can we restart "Cisco Desktop Browser and IP Phone agent service" in business hour. Also what will be the impact on restarting this service. Regards, Raj
outbound calls are working fine but incoming calls are not working on same port . i run debug vpm signals and the output is below : *Mar 6 08:01:42.526: htsp_process_event: [0/0/0, FXOLS_WAIT_RING_MIN, E_HTSP_EVENT_TIMER]fxols_wait_ring_min_timer*Mar...
Hi All, MGCP gateways are failing over between the different subscribers on a regular basis. Attached is a trace I did from the CUCM side a while ago showing the modify connection message timeouts that are occurring between CUCM and the gateway. Cuc...
Hi.i would like to share my Config, for those who want to use a third-party sip phone.I am using default config, files and IOS from CME 8.1 on my Cisco UC520.I used the latest firmware from snom 8.x.xx ; http://wiki.snom.com/Firmware/V8/RecoveryI did...
I have a client with a Conference Phone 8831. But it does not satisfy the customer satisfaction because the group can not be heard (12 people in the room). They have tested the two parts of microphones that come with this equipment both wired and wir...
Is there a CLI command I can run to see if a UCCX 10.6 server is running in mixed mode?
1.8.6.2 version of CUCM support H323 registration?I have a TC7.1.4 version of the SX80, like H323 registered on the CUCM。2.Sipdx80.10-2-2-23 version of the DX80 support H323 registered CUCM it。Listen to others say DX80 can register CUCM。
Hi, Can I create just one CSR request via CUCM Publisher OS GUI using the subject alternate names (SANs) adding other two clusters with 6 nodes each + unity connection clusters ? Just trying to understand if I can do that, I can have only one CSR ...
Is there a way to create a "secure meet-me" scenario that requires a PIN to authenticate? We want to control/ authenticate users to the conference.
Hello, I'm trying to setup Visual VM using CUCM as the call manager but Asterisk PBX as the VM server. I've followed these steps https://github.com/reillychase/FreePBX-Cisco-SPA-Visual-Voicemail I'm using a CISCO 8865 to test. The question I have ...
Vg224 status unknow on cucm this gateway contains ports for fax. >not able to ping to vg224 other vg224 are pingable.Main gateway is h.323 which is working fine How to troubleshoot the VG224 why its not reachable ?
Hi There, I have recently done installation of Expressway E X8.5.3 with advanced option key activation.I do not see Dual network option in there under System Ethernet. Plus I do see an alarm that indicates something which I have no idea about.Here i...
Hi, We are using the Exchange UM as the Cisco IP-Phone voicemail. The Exchange server and Cisco CUCM are also on-perm.Now, my users want to migrate to the Exchange Online mailbox. I checked I can deploy the ASR 1000 with SBC to do the integration.May...
