Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi, I've seen posts similar to mine that were solved changing the name under ephone-template #; but my CME was configured using ephone templates and registering the phones under pools #. I've changed the name under the equivalent "voice register dn #...
Where would one purchase extra rechargeable batteries for the 8831 wireless mics?Here is the info on the battery itself: E502248470mAh, 1.74wHP/N 4500044-00"
I am trying to find a replacement battery for the wireless mic's connected to an 8831 Conf Phone.The mic's part number ,I believe is 4500044-00. I do not know the part number of the battery
Hi, we have cucm , cuc 10.5 when I call the callhandler I heard the personal record during it I press an internal extension , but I hear " sorry we cant transfer to this number" I checked Allow Transfers to Numbers Not Associated with Users or Call ...
Hi everyone. I hope you are well.I have a CUCM 9.1 and i downloaded the RTMT, but when i had tried open, the application only ask me for the user & password, after the application shut and does not appear anything. Does anyone know what can i do? T...
I have looked at the feature navigation for the csr1000v and although some docs state that CUBE is available (starting from 3.15+), it does not seem to be listed as a feature (or at least I could not find it) for filter = IOS-XE + CSR1000V . Assumin...
I have looked at the feature navigation for the csr1000v and although some docs state that CUME is available, it does not seem to be listed as a feature (or at least I could not find it) for filter = IOS-XE + CSR1000V . Assuming its supported, does ...
Hi All, We are having issues with 7962 phones & 7915 Side cars. Issues seems to be intermittent, while receiving incoming calls, if the customer tries to place the calls on Hold or Transfer, calls gets transferred successfully but Side car goes thro...
Incoming calls not working from PSTN to CUCM using CUBE SP:(Signaling-peer status: Down) Cube SP -cisco ASR1001 (1RU) +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ We have CISCO Cube SP installed at one of ...
So I am having trouble finding an article that gives me a clear answer. I have a pub and a sub. The sub goes down. I continue to make changes to the pub. when the sub comes back up, will it sync with the pub? I have seen implied articles that say ye...
How to login in Cisco Call manager through console port
Hi all, I tried to upgrade our CUCM cluster from 10.5.1 to 10.5.2 to enable us to register some phones that were not compatible with 10.5.1. Everything seemed to go smoothly - bar one seemingly cosmetic error that has popped up saying DNS unreachable...
Hi All, Hope you all are doing good. I am facing issue with call routing. We have 4 PRI E1 lines in India and just We want to busy all lines and calls needs to be routed other country(Singapore). Please help me with call routing information and pre-...
I don't think this is possible but I've been asked to research possibilities of controlling door locks and viewing video from door stations. I've seen the integration of the 2N Hellos video door station. Really neat solution and would be great if I...
Dear All, We are unable to make external calls over FXO lines. When digit is pressed we are hearing noise and cannot dial further. What could be the problem.
