Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi guys! I am trying to develop a configuration where I have Ip desktop phones from Mitel and an Ip wireless Cisco Phones integrated by a SIP-TRUNK. Simple call flowMitel (desktop ip phones) - Sip Trunk - CUCM Version 10.5 (wirless phones such as 79...
we are running CUCM 10.5i noticed that between our phones we can only have 2 concurrent calls before the 3rd person calling the user is sent directly to voice mail. is there a way i can increase that to 4?
We have a gateway connected via MGCP for several FXO ports.We use local configuration for when the gateway cannot connect to the CUCM server.When I configure my dial-peer section I've been placing the FXO ports with "service mgcpapp" at the top of th...
Hi, anyone has experienced idd call issue with mgcp gateway? So far I only got one gibraltar number has problems, every time I call this number, it goes to diffetent destination, sometimes to the fire department, sometimes a fax machine, sometimes a...
I've got 3 phones that show up as "registered" in the CUCM but don't actually come up. I can't even reset the phone from the CUCM anymore. They have worked before but didn't come up after the CUCM was reset. Their screens do have the correct time and...
One of my customer asked me to check feasibility of below requirement, can somebody share yours view on simplest solution.1. Block all external calls from all extensions except operator console (Calls blocked for users from 11:00 PM to 8:00 AM includ...
Hi guys!, I was wondering is there exist any way to configure "Group Listening" on C7965 Phones, as far as i know this feature exist for C7911 Phones, but i couldn't found anything for other phone models. Have anyone of you found a solut...
Hi iam having BE6K Server, i am trying to configure CUCM , the BE6K is connected to Core Switch with VLANS for VM and VLAN for CIMC and Managment Problem:- 1)I have configured CIMC and Managment in VLAN 100 2)VM(CUCM) in VLAN 1 BUt ...
Dear Team,I wants to publish Cisco jabber for (iphone, window and android) over the internet.I did not find the PhoneSecurityProfiles in the form of an FQDN that includes the enterprise domain. Any idea how to find ? THANKS
Is it possible to set a pin for conference call ,once user dials a conference number it should authenticate a pin,once successful authentication it should join into the session!!
Hello!Can the Cisco 7942 with SIP Firmware used as standalone SIP device?I mean can it works with SIP provider through NAT, like it can Cisco SPA-303?
Hi all,We got problem with phone rebooting and its network cutting during phone rebooting time.We got that scheme:Access sw with PoE---CP-6941---VDI monoblock under Citrix.When user logs into an AD with his credentials the phone goes to rebooting cyc...
Hello, we have 10 users in our network and we have 4 FXO port and lines connected to them, we would like to implement this requirement on our network below; 2 users will have access to FXO port 13 users will have access to FXO port 23 users will have...
I have a voice translation rule that reads:voice-translation-rule 2rule 1 /.*/ /5415489400/This basically is applied to all outbound calls so that all callers see our main number and it works great. However, I have one internal extension that I need...
Hello guys!Hope you are doing fine. I would like to know if there is a way to configure two different auto-attendants in Unity 8.6.2, I mean, I want to have two different auto-attendants with different scripts for 2 different directory numbers at the...
