Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am trying to decide which to deploy to a site that has a little over 100 users and they use a lot of features with their current phone system setup. For example, one setup is ring once to 'x' user and if they dont answer forward the call to 'y' gro...
Hi guys, what is the bandwidth requirement for TX9000, on datasheet its mentioned on cisco website its 10MB i need to have some practical example weather this real bec some cisco patner are saying 14MB for three screens.
Hello everyone!We start using ELM for Call Manager Licensing and I just can not understand they way it works. I am used to DLUs and can not undertand the new schemeJust to make is clear:We have Enhanced (9.x) - Unified CM Available - 180 InstalledDoe...
Hi Guys,I've recently been having a play with the phone handset based visual voicemail application thats offered by Cisco Unity, as per https://supportforums.cisco.com/docs/DOC-28282One thing I cannot seem to find is a list of device support.I know t...
Hi All - We have installed CUCM 8.5.1 cluster with PUB and one SUB, Checked the DB Replication from publisher (GUI) observed the below results.PUB - GoodSUB - InitiliazingReplication Count same for bothChecked the same from SUB (GUI), observed Good f...
Dears,I have a Cisco 6921 phone I registered it with CME 8.6 normally and this can display the username on it.But when I registered it with Cisco CM 9.1 the display name didn't display on the screen.Please any ideas for this issue,Regards, ...
I think I allready post on that and I got different answer somewhere else..Anyone did a CUCM migration from 5K to 6K We know for the unity we can user the Cobra but for the CUCM I think we cannot do a CUCM backup and Restore from DRS because the pla...
Dear Friends,We are planning to implement the IPT on one of our customer, we are planning the below design but need some expert advise on this.IP Phone (In India) -------> CUCM (In USA) ---->Gateway (In USA) to PSTN (USA).No PSTN calls to India would...
Hello. I have a problem.No ouside outgoing calls go((( To call outside we use SIP server. But it shuts our calls because it goes from private call numbers! In debug I see:VOICE_REG_POOL: No entry found in contact table Sent: INVITE sip:0444555146@77....
Hello evereyone! Thanks in advanced for looking.We have a CISCO 2901 router configured with DMVPN and IP CISCO phones 7945 that is part of our WAN. We have 4 digit calling across the VoiceNetwork on 3 different states (using Call Manager) We recently...
I have created separate dial-peers for inbound and outbound calls on th same voice-port (FXS) and I am not sure why a particular dial-peer is being match on the inbound call. If you look at my configuration below, a call is coming in from port 0/2/0 ...
Dears,I got a issue on Publisher and I can´t get ccmadmin by browser; I restart the Publisher- Cluster CUCM, 1 Publisher , 2 Subscriber- CUCM 5.1.3.2000-3 - BD Replication is GoodServerNumber of Replicates CreatedReplicate_State10.108.55.5 ...
Hi,we are planning to connect our cucm in europe with the cucm in USA.We need to look at new dial plan.US suggests to start *1XXXXX to dial internally from EU to USA. eg, *198765We suggests to start 82XXXXX to dial internally from EU to USA. eg, 8219...
Hii, I want to buy a Conference kit for the meetings rooms and I need some opinion about the models, in the past I used 7937 and now I want to by 8831 and I want to know your ideas about this conference kit ( is k or not, how many license.... ).I u...
Hi All,Webapps folder is missing in this path C:\ProgramFiles\wfavvid\tomcat_appadmin\ and I am not able to login to the appadmin webpage.Please suggest what needs to be done.UCCX version is 7ThanksBhavna
