Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi Everyone;I have a bug that is being presented in CUCM 7 and that is when the receptionist you want to end a call with the button "end call" does not end the call and wait for the caller to finalize, this is a setup for receptionist and making the ...
Hello to all;I have a working telephone exchange with CUCM 7.1.3, where Extension Mobility is used to register the devices users of rest is configured with a power standard CUCM, the problem I have now is that I can not set the conference between int...
Hello,I am trying to get some 3rd party devices (gigaset DECT gateway 192.168.0.22) to register to a CME (192.168.0.79) box.I have 3 x extensions configured on the Gigaset but I am getting SIP errors :-000226: Sep 23 18:00:36.779: //-1/xxxxxxxxxxxx/S...
Is anyone aware of any soluition that would provide some kind of Speech to Text / and vice versa, service for hearing impared people. This could be a 3rd party solution. Something that would allow someone to see what is being spoken real time, perhap...
Just in case this helps somebody else keep their remaining hair intact... Migrating an ATA 186 to CUCM 9.x requires the ATA to be running firmware ATA030204SCCP090202AI've just spent a few hectic hours trying to work out why I couldn't migrate some A...
Hi, I have tried to load firmware files cmterm-7945_7965-sccp.9-2-1.tar to new 7945 ip phone in CME 9.1, when ip phone initiate the process of loading firmware a messge is displayed load rejected HC, the process go on without loading the files and fi...
Hello All,I'm planning to change the domain name of my CUCM cluster (2 nodes) ver. 8.5.1I went through this guide:http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_5_1/ipchange/ipchg851.html#wp57408and it's clearly stated that:If you chang...
Hello everyone. I am new at Cisco VOIP and i need some help.I manage to create VoIP on my router C2911 and i have 3 IP phones. I have one voice port that is conected to my country telecom(ground line whose number iz YYYYYY). My phones have 3 digits e...
Hello,I have 4 E1 Pri links with different DID terminating on 2 no'sVoice Gateway. How I should plan on CUCM 8.6 so that the users of specific DID should flow from his E1 PRI link.Please explain Thanks
Hi all,I have a CME connected to Nortel PBX through an E1, in both systems i have extensions 1XXX, so for example, 1110 and 1111 are cisco extensions and 1112 is nortel extension, when 1111 dial 1112, the CME find that the extension is not on the CME...
HelloAnyone , have a solution for MVA calling name problem for CUCM v7?. The call is ok , but the calling name not appears?. Any ideas.Thanks
Upgrading License of callmanger version 4.0 to 9.x version.We need to supply 222 enhance upgrade License to the customer, they have 222 users [ 7940, 7960 IP Phones ] with callmanager 4.1.
Hi All,I have to connect to a telco in Suriname and the isdn switch type he is working with is Ericson TSS4.0. Have any of you guys heard of it. I did some research but i am not finding anything that is describing this. What will work on Cisco's en...
Hi, A costumer use TAPS to register his news devices cisco and i know that TAPS is easy to configure but we have a problem.All the new devices don't register on CUCM with a DN on the range defined.If we look the TFTP logs, we see that the SEPXXXXX.cn...
Dear I have unity connection ver 9.1 , i did upload the license and i did create product instance for main unity server , but after do " sychronize now " , it gives me " application error " and still license in unity connection administration page : ...
