Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dear Experts,I have many issue with the CRS server 5.0(2) of one of my customer and I can't access to the CRS administration page even with the support of the TAC. So we have decided to install new server having the same paramèter of the old and rest...
Hi,While using Cisco AS53XX/AS54XX (or any other similar GW), I need assistance to adjust/alter the ISDN messages back to the switch in case the internet connection to the GW is going down.The GW is connected with E1 ISDN PRI circuits to a Nortel Int...
Hola,Hago este post en español porque entendere mejor si alguien me indica como hacerlo.tengo un rango de numero de la Telco 2176300 a 2176399y necesito transformarlos a los internos que tengo ej:2176320 al int 13001me pueden ayudar por favor no le e...
Hi All,I recently implemented a CAD 8.5 environment which was an upgrade from 4.2.For some reason it is taking up to 10 seconds before the call is connected to the agent which is affecting our SLA's, and I need to find out what is happening in this 1...
Hello,We have user A that everytime he leaves a voicemail for another user B the viewmail on outlook for user B shows another user name not user A name. We have unity 7.
Hi all,We'd usually position FXS cards/VG2xx devices if a customer wants to use a modem-like device rather than ATA 186 because of past issues.Does anyone have any experience with the new 187's with modems at all? The datasheets only seem to indicate...
Hi folks,One of my customer has a CUCM8.6 with H.323 gateway (Cisco 1861e with two integrated BRI ports). This infrastructure is shared between two companies. How can I select which BRI makes outgoing calls based on internal calling party (for exampl...
Hi,To cater redundancy for EM we have created 2 EM service: EM-1 & EM-2. I can find both of these EM services on any IP phone, i can login as well. The problem that i am facing is: once i logged in chssing EM-1 or EM-2, if i press the Service but...
Our Concord office recently moved and we had to get all new phone numbers. We had the old number forwarded to the new. However, when they dial out, the old number still displays on the recipients caller ID. I read through the forums, and it seems...
Could anyone point me to a document that shows how to use a PSTN MGCP endpoint registered to a CUCM for a breakout by a CME device which is peered to the CUCM via either h323 or SIP.Hopefully the pic below explains better including the dial-peer at ...
Hello,Client has Nortel and Cisco phones, the two systems are connected by 2911 GW using QSIG. Calling name is not being displayed. I have confirmed that calling name is allowed on the route pattern. We thought we might be hitting a bug, CSCsr0392...
Hello all,If I generate a certificate for Tomcat will this be non-impacting during production hours? Thanks in advance.Thanks,Matt
We are in the process of moving a new office to our centralized call manager that currently uses the Call Park feature. They want this set up for 4 lines with 4 parks. I added a a Call Park configuration under Call Park in CUCM with a mask of 795[0...
Hello Team,In the past I used to install complete device packs, network locale und user locales corresponding to the CUCM release.Now I learned that also phone locals and phone only locale installer (po-locale...) may apply.Can sb explain the depeden...
Hi Folks,I'm trying to estabilish a Sip call, but the call cannot go through. I'm sending 3 invites and not receiving any ACK.I have attached the debug ccsip all output.CALL FLOW:IP Communicator -> CUCM -> H.323 Gateway / CUBE -> SIP Provider -> Exte...
| User | Count |
|---|---|
| 8 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
