Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We're running CUCM 7.1.5 and UCCX 8.0.2I'd like to use a dedicated MoH stream from CUCM for my cti ports associated with our UCCX applications. That way when our scripts put the caller in queue, the hold music comes from CUCM.Two MoH questions....-C...
Used the OVA template for install on VMWare ESX, seems to just be cosmetic error message at console; Cisco Unity Connection 8.5.1.10000-26UNITY01 login: ATAPI device hdc: (reserverd error code) -- asc=0x00,ascq=0x00) The failed "read Cd/Dvd Capacit...
Hi, on our CUCM8 Business Edition server it has 500+ device licenses installed. Everything works and there is no problems.However it is still using the Demo license for the node license. We never recieved any PAK for a node license.My question is s...
Hi All, I have two question: 1- I am staging the equipments in the lab, CUCM shows unregister for T1 port but registered for FXO ports. T1 is not connected to anything. does it need to be connected to telco in order to be registered in CUCM? 2- is i...
I'm having the issues described in Cisco bug: CSCti04412 http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCti04412 To fix it I'm supposed to apply the ES3 (or higher) patch to my unity servers, and Ins...
Hello,I am facing a problem in routing calls from voicegw to CUCM,the following configurations was implemented on voicegw:dial-peer voice 787499872 voip preference 1destination-pattern 0787499872voice-class codec 99session protocol sipv2session targ...
We have some 7965s that are different version numbers. For example one CP-7965G v02 and a CP-7965G v07.The fronts look the same. Some minor cosmetic differences in the back.Any real differences, in terms of hardware, firmware support, etc? Or are ...
Hi All,we are using unity connection 8.0.3 and CM 8.0.3 and recently we have one user who MWI light will not go off - The user has no VM's or saved messages.What I have done so far:Go to unity and deleted and recreated the profile...On unity, I tried...
I would be glad if someone can help in this. I am working on a CME hunting setup for a customer where when a call is not answered/busy on any phone, it will start ringing a hunt list....customer has reported that although hunting is working perfectly...
We have been asked on a recently deployed CME 8.1 whether CFwdAll can be bypassed by entering a code before ringing the extension number. On their old phone system, the end users report they used to divert calls for particular extensions as there wa...
Company has two 2921's running cme/cue on same network. The medical locations register to one CME, the admin side to the other. Is it possible to have people doing searches in the local directory for eomployee phones to get results from both local di...
Hi!We are intermittently having issue at one of our customers, where phones intermittently restarts and we see in the RTMT the following error message;The site is a remote site having a H323 GW, 2851 chassi. IOS version below.Load=SCCP42.9-03S TFTP E...
Hi Guys,I'm setting up a proof of concept lab based on 4 nodes (1 Pub, 3 Subs) running CM 7.1(5b)SU3. Pub and Sub1 are in location A, Sub2 and Sub3 are in location B.My problem is that the CTI Manager service on Subs is activated, but doesn't start e...
Hi, hope someone can help out.We developed a problem with our 7940 IP Phones. We're on CUCM 6.1.2.1000-13. Recently when our users who use extension mobility log on/off the phone resets and then complains that the TFTP file cannot be found.We have 6 ...
Hi guy,Want to check either anyone experience the same problem my user have.My user was using the 7962 model IP phone to running some long period conference call. Their feedback to me, when ever their put the phone without any activity (the call stil...
