Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hey,i have to implement voip in serveral locations in china. in two of them, i want to use sip accounts/trunks as pstn-breakout (with 2800 series). i didn't found applicable provider for this. does anyone can recommend a provider?
Hi Engineers,Anybody can give a step by step document on how to restore my CCM publisher,I got an error before booting up the serverWindows 2000 could not start because the following file is missing orcorrupt:\WINNT\SYSTEM32\CONFIG\SYSTEMced startup ...
Hi,I am facing a strange isue in Cisco 7937 Conference Phone. None of the Speed Dials for International numbers are going through these phones, where as it working fine earlier. There has not been any changes in the CCM configuration. From all other ...
What's ASA phone proxy solution for remote phone across the internet?
I have two CCM servers running on versions 4.1 and 4.2. Can I integrate these two systems to a single enterprise LDAP ?Thannks,Nalakak
We have a UCM 7.x system with about 1600 phones, is there a guideline that would indicate how much disk space is required for each DRS backup? The SRND and the DRS admin guide do not indicate how big a typical database is when backed up.
Dear All I am in a big trouble. I have CCM Publisher 5.1.3.1000-12. My issue is my Subcriber that had the same version had crashed. Now I am trying to reinstall it, but the problem is I have the media of 5.1.2 so it's not joining my Publisher as a se...
I have a home lab with the following setup:vlan 5->data vlan 10->voiceCME Router Cisco 1760 has been configured as a DHCP server to assign IP for both for data and voice vlan.CME Router1760 configuration:int f0/0.10ip address 192.168.10.1encap trunk ...
How could i do range port fowarding when under nat. I want to forward a range of port ex: udp 5059 to 5072 to an ip of my lan (a server at 10.1.1.50) and another range (udp 1000 to 20001) to the same ip (10.1.1.50). I use a dls connection with an int...
Hi, i have a ccme with an h.323 trunk to a sevice provider; when ia used pohn cards i can hear the ivr and dial any long distance number begining with one (the call progress well); when ia dial a number with 0 (in example 011 to Europe) the service p...
I have some managers with 7985 and I need to know if I can configure the IPMA for them.7.1(2)I referred to Cisco Unified Communications Manager Features and Services GuideThe following phones that are running SCCP support Cisco Unified Communication...
Add failed. [10109] Remote Destination cannot be added because the Remote Destination Limit set by Administrator for this EndUser account has already been reached.I want to increase from 4 to 6 the number of Remote Destination limits? Where do I set ...
HI, 'm running a vg224 directly connected to a service provider h.323 trunk, calls works well, ut i can't send caller id; i tried using clid command and translation rules, but it doesn't work.
Hi,I have a customer who runs these with CCM 3.3. He also has a couple of Quescom 300 GSM gateways which are configured as H.323 inter-cluster trunks.I am upgrading the cluster to CUCM 7.1 and am trying to find out any information about using the Que...
Hi,I need to enable password for International calls in CME. Is there any way i can enable this feature on CME.Regards,Sunish
