hello, On some of our XP computers, the ciscotsp001 fails to show up as a provider (phone and modem options) after installing version 6.1(2.4). Doesn't matter if its an upgrade or fresh install. Any ideas? Thanks in advance..
Hello netpro'sStrange problem here, I have just upgraded CM 4.1.3 to 7.0.1 and the only problem I have is to do with a CTI RP.The old CM 4.1 system had a CTI RP that had a directory number associated to it, this directory number had a CFA to a hunt p...
Hi: I have a switch that has a data vlan configured and a voice vlan. data vlan is 341 voice vlan is 546 Here is the config: ================================================================================== vlan 546 name Avaya_Phone_vlan546 vlan 341...
Good Afternoon,I have 2 UCCM's in 2 different countries where we are utilizing our WAN for dialing between sites. What options are available should i have a WAN failure and need to be routed out the PSTN. I do understand that AAR is used for CAC an...
I have a user that says the old Fujitsu PBX prevented all other users from putting her on hold. I tested this and verified it worked that way with the old system. Are there any good ways to do this on CUCM 6?
Hi I have a CCME version 7 installed, the problem is that the music on hold only is heard from the pstn caller, the music on hold in the internal phones registered in the call manager express is not heard. Why ?telephony-service moh music-on-hold.au
I'm trying to build a lab VMWare 7.0(1) system to check out some features, its not a production system.I've built many 5.x and 6.x VMWare systems that have always gone fine.When I try an upgrade from 6.x to 7.0(1) it always results in a failure to re...
Hi, is there any way to upgrade CCM 6 to 7 such that all licenses upgarded automatically? or something such as export licenses and importing to new installation? my problem is that i don't have any info like PAK or serial number of my license on CCM ...
How do you configure/start NTP on Meeting Place Express? I keep having to reset the time. Today it was 20 minutes behind and caused all kind of havoc. :PThanks
I am troubleshooting voice issue in a call center, there is some delay on Hybrid Voip to the operator work station. I am using Cisco AS5350 VG for voip that is connected to a cisco WS-C2950C-24 where all the workstation are plugged in to.How I can ...
I currently have a MCS7825I4-K9-CMB2 running 6.1. Checking the release notes for 7.0 I noticed that this server does not support 7.0. Is this a misprint or do I have to replace the server? Will there be a future release of 7.x that will support th...
I want to configure a 3640 router to act as FXS ans PRI gateway. I had found how to configure ccm 4.2 but what configuration i have to put in the router ???
I am Having a issue accessing Unity System Administration.1.) I can accesss via RDP but System Admin is not in the Program\Unity folder, it does appear on the menu bar under the Cisco icon. However, it will not take my credentials. Shouldn't "System ...
