Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Running cm 5 and doing call forwarding to a cell phone called party and calling party are correct but the tx to the carrier is also sending original called number which is the 4 digit extension and carrier appears to be taking that as caller id. Is t...
have a callmanager trunk with CME works fine except for ad hoc conferencing. No regions defined all codec g711. Any thoughts?
HiHas anyone seen a scenario when CCMAdmin displays the IP address of a CallManager in lists of phones where it should display the IP address of a phone?The address is a hyperlink that takes you to a web page served by the handset. Occasionally some ...
Hi,I am using callmanager 6.0 and I can not see Cisco 7945 and 7965 phone button templates under the phone button templates list. Phones register ok, however I need to modify and create a new phone button template for 7965 phone customer is using. On...
The clocks on the phones are slipping and can not be sync'd with the Domain Controllers. I have an open TAC case (one month and counting) and just realized I never asked the EXPERTS. Here's the error when trying OS Administration/Settings/NTP ...
Hi Friends,i've got a big problem, i have 5 SIP line with username and password, one router 2821, and a serial port that is configured with 2 MCR one for Internet and the other for VoIP. How can I configure all 5 user and password? i have tried in th...
Phones used to display "Forwarded to Voicemail" (or whatever number) but now show "Your current options" even when the phone is forwarded. This is confusing some users who think the phone isn't forwarded. Not all phones are affected.
Found and fixed another issue in the B-ACD/AA script by cisco.Basically, when attempting to use live MOH (even if just a file configured under telephony-service), the script crashes with:TCL script failureResult:Play FailedTCL script failure errorInf...
Trying to move subscribers between unity 4.0X and 4.21 using GSM. When I right clock on the users and select "move", the utility says it can move the subscriber, but no destinations show up as available. Any thoughts? thanks
customer is having 5.1 ccm cluster up and running.He wants a diffrenet dial ouside dial tone.. Whenever a user press 9 system givens the outside dial tone and somehow he claims that it can be changed.Does anyone has idea how to do this ?
Hi all,I am using CM6.0 Bus. Edition. Since our users require DND functionality, I have their phones using the "Standard Manager" softkey template.On 7940 and 7960 IP phones, the screen is smaller and only 4 softkeys fit on the screen, so DND is in ...
HiI configured AC Pilot in such a way that it does hunting of phone numbers based on the device member. Also, I have chosen last DN to always route so that when outsiders leave voicemail it goes to this extention/DN. But, it is only hitting the first...
I'm running CM 5.1.2.3000-2.When I do a search for phones, a few are comming up with their IP address listed as the IP address of the CM subscriber. I have fixed this in the past by just rebooting the phone, but it is happening again.This is not af...
Is there a way I can integrate the corporate directories in a multi cluster ennvironement?I've got a 4.2 Cluster and a 6.0 Cluster connected via Intercluster trunk. Users like to call users in the other cluster via Webdialer or the corporate director...
I need to know what is UNITYV5-USR-E10= 10 Unity VM for Exchange User Licenses for.I have a unity 4.x server with storage for exchange. The server comes with the fist 50 licenses, i have more than 50 users with voicemails and exchange mailboxes, wh...
