Hi to allMy question is very simpleIntercom working fine , but the issue is that you can call only one intercom phoneWhat is the requirement if i want to perform an intercom call to a multiple phonesDoes this work with Hunt group?Regards
Forum Posts
My company has 4 Call Manager subscribers, two at our HQ datacenter and two at our colocation. We powered down everything at our colo this part Saturday because we are moving it out of state. Since then, we have had random locations having switch ...
I bought a new KEM (PID: CP-8800-A-KEM) along with the cisco ip phone CP8851 but unable to power up the KEM. I am using C2951 ISR with IOS 15.6 and Cisco Unified Communications Manager Express (CME) version 11.5. Please note i am using call manager e...
Resolved! CSCus56895 and non defined IMS exception
H All, I seem to have hit bug - CSCus56895 which gives me a non defined IMS exception error message when logging into the new 12.5 cluster. The bug fix states to "copy CCMEncryption key files from Source Node to Destination Node. would need RemoteAcc...
This is a 2-server cluster of CUCM 12.5It is a small deployment of around 100 phones that don't handle a large volume of calls.I'm pulling logs for the CallManager service.Typically I would expect to be able to go back at least weeks but I can't pull...
I have headset Bluetooth paired with cisco phones and working fine, but auto answer not work. I tried to enable Auto answer with headset on DN but still any incoming call on phone not auto answer, is there anything I miss other than configure auto an...
Hey Hi, how are you today?I need to update the telephony-service version from 12.0 to Version 12.5 in order to the expansion key module on cisco phone 8865 works on my router 2951.I read many websites and the most "easy" solution is update the iOS ve...
Cisco C8000V. Cisco IOS XE Software, Version 17.06.05. Trying to implement static PAT to translate SIP traffic between private and public voice gateways.<172.17.20.36:3002> <Cisco NAT 1.2.3.4> <5.6.7.8:5060>ip nat inside source static udp 172...
How can I get the Diagnostic App on a Cisco wireless 840 phone. The phone does not have the App and it could be useful in troubleshooting an issue we are having with the device. Cisco's literature mentions the Diagnostic App, but I cannot find it a...
Hi guys,I receive this error every time I perform a Presence Backup...any idea? I got a cluster with 2 servers and the System version is 9.1.1.10000-8=====================================================Server : CR1PRD108Feature : IM_AND_PRESE...
Hi guys,I have CUCM and CUBE with STC SIP trunk the outbound calls works fine but the inbound calls has no ring back tone and once answer it's silent and keep give calling from caller side Sometimes after many trials then call works with voice sudden...
Resolved! 3905 Line 2
Is it possible to make a 3905 have a second line?
Resolved! SRTP config
Hi All, I'm trying to establish a SIP trunk to an ITSP using TLS and SRTP. We think we have done all the trust point stuff and TLS seems to be OK. However, I'll a little lost on the SRTP. Looking at several guides looks like a few different methods. ...
Hello,Anyone know how to generate outgoing call report to mobile phone only?
Time of Day Routing - Monday through Friday set hours, and Saturday different hours than Monday through Friday.I want to use "Time of Day Routing" for a Monday through Friday schedule and a Saturday schedule with different hoursMonday through Friday ...
