Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Experts, We have CCUM 10.5 in virtual environment installed on Cisco server. We also use informacast 9.0.2 but that separate topic. I wonder what and how would be upgrade to latest version which I believe 12 is. Can 11 be skipped? I have never done...
hello, I sometimes look at RTMT to troubleshoot numbers people dialed. I have very basic knowledge in this. When going into Real Time Data field under session trace log view, I see there is a "Calling DN", "Orig Called DN" and "Final Called DN". C...
The existing cluster(s) are configured across 2 DC's. DC 1 is being decommissioned. All the applications instances to move on a new location DC 3. The versions are NOT going to change nor the setup at DC 2 will be touched. IP addresses will be from...
Hi, A strange behavior of unregistered DNs on CUCM 11.5.1. if the DN's are configured with NoVoiceMail Profile the CUBE witness a huge call loops with same A and B Numbers. ITSP asked to add huntstop under the dial-peer that should take care of loops...
Upgraded the from P2V from 8.5 to 11.5 using PCD. worked fine. Now customer did not cut-over for some reason and 8.5 environment was updated as it was production setup. 3 months down the line i need to verify the delta and re-sync. what should be the...
Hi,As subject says, is it possible to make a line group-hunt list with external numbers (e.g. mobile phones)What I had in mind is to make CTI route point/port and to do CFA to mobile number. But:-on 6.x I couldn't even add CTI route point / port to l...
Requirement is to port the DID of ISDN to existing ITSP SIP trunk and route internally. This specific range requires to be called from certain numbers. (mean the trunk has to have specific inbound CSS vs other DID members which will have regular inbo...
How to connect asterisk with cisco call manager via sip trunk ? Please tell me the configuration to be done on the router. I'm new here. Please help. Thank you in advance.
I am just deploying a BE4000 (ISR4321). 1. We make the https://be4000.cisco.com/deploy settings on Cloud > users > phones > extensions > T1 > ISP send digits .., bar bar bar 2. Generate the code on Cisco Smart Account 3. Connect the g0/0 port to Inte...
So i had incoming calls work before with a test number received from the provider. Today they changed the number on their end to what it's suppose to be and incoming calls are now failing with message 500 internal server error and cause 16. Why is t...
Hello, I have Gateway VG01 with 2 PRI from ISP 1 and ISP2. Both these PRI are currently member of Trunk-Group PSTN. This gateway is defined as H323 on CUCM side, so there is no control on ports. With current setup only 1 PRI trunk from ISP1 is in use...
How dialpeers work for h.323 or sip GW/trunk for incoming and outgoing calls . what is the call flow in terms of SIP and H.323 for an Incoming and outgoing calls. how dailpeers comes in to the Picture . as i know call manager will not come in to the ...
Hi Team We have publisher and three subscriber. Rout list is registered with third subscriber only. I restarted route list but no luck. Regards,
Hi, we used a virtual CUBE for the SIP Connection to our provider. The provider need the call in a format like this: 0049XXXX but we are using an E.164 Dial Plan on the CUCM - +49XXXX. The call works fine and inbound call are presenting right – the...
Is it possible to retrieve the participants numbers who joined on a conference, if it is doable, how can it be done
