I have the following configured for Cisco IP 7925G Phones- Call Manager CUCM 6.1.3- Cisco Wireless Controller 5508 ---- WLAN configured for WPA2 with 802.1X + CCKM- Cisco ACS 5.3 for Authentication WPA2 with PEAP - Cisco Wireless IP Phone 7925...
Dear Friend,I have a question regarding the call forward. My requirement is, When I call Forward my IP Phone extension to be redirected to my mobile phone, and if someone calls my IP Phone extension, the call should originate from my IP Phone instea...
Hi,For one of our bigger Cisco UC customers we urgently need an analog booster device. They have several thousands of analog internal phones and some of them are very critical (nuclear plants). But some don't receive the signal from the VG224 or FXS1...
I am running CUCM 8.5.1. I have about 50 or so translation patterns. Is there a report that can tell me how many times each translation pattern is being used daily or weekly?
Hi Is it possible to change the system own default greeting? Or simpler... replacing the "cisco girls" waves.Example:<<My Text>> Voicemail Box Owner Name <<My Text>>Thx for helpPhil
I have an existing UC 8.6.1 integration with Exchange 2003. I need to add an Exchange 2010 server. Does anyone have a step by step process to perform this installation? I have not found any docs that are particularly helpful. I see the following ...
Hi, We have configured two CUCM version 8.6(2a) such as Publisher and Subscriber and we are facing some problems on this, •1. IP Phone 7965G is not register with backup CUCM when primary goes down. But rest of the phone 6921 phone are able to reg...
Hi all,I’ve got a couple of customers that want to take advantage of Jabber for everyone (free presence server) but they don’t necessary have a spare MCS server or a VMware environment to install in.I have tried to install in Citrix XenServer but obv...
Hey all, I currently am running CUCM & Connection 8.6 using LDAP integration. I am considering changing new connection users over to be imported from CUCM due to the ease of creating account for my guys who do MACDs. During testing I did find that u...
Hello,From a call handler, I'm doing a "Allow Transfers to Numbers Not Associated with Users or Call Handler" under the greeting. If I dial an extension that does not exist, I get the message "You cannot be transferred to this number..."I'm wonderin...
Is it possible to have a user licensed for Jabber for windows and use the software, but be hidden from all other users to add as a contact, say a President or high level exec who does not want the regular user base to have him/her in their contact li...
Hi Guys, we are going to setup a few SIP Trunks between CUCM 7.1.3 and third party FAX server. Do we need extra license for this SIP trunk? I had a look at the license calculator but it doesn't mention any SIP trunks. So I think it will not consume a...
Hi there,We would like to migrate our CallManager solution from UCM 7.1.5 to UCM 8.6. We are using the DUL license mode for devices and we would like to change to the license mode to UCL. Could you please give me some explanation or send the link for...
I am currently working at a client site where CUEAC 8.6 has previously been deployed. Many of the toolbar buttons are greyed out and I cannot figure for the life of me why. Particularily the transfer key is the one the operators are complaining abo...
I'm currently using Unity Connection 8.5.1 with Cisco Unified CallManager version 7.1.5. I'm trying to see where I can make sure our Class of Service is correct for the Unity Connection voice command and am unable to find anything. Can anyo...
