Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Looking for some assistance on an ongoing issue I am having with our SIP provider and periodic issues with dropped registration. We have two ISR4331 Routers configured using HSRP. Running CUCM 11.5. Began migrating numbers to SIP from PRI's and ...
Hello, We are going to install a new SRST ISR4351 on a site. I am used to configuring remote sites with ISR43xx with FXO ports in H.323 and/or MGCP (we use both). I always use a "connection plar" to go to an auto-attendant (in H.323) and I use the "a...
We are using Unity 11.5 and I have Voicemail setup to hit a Windows Virtual Relay Server to send the voicemail to their E-mail. The problem is it occasionally relays to a Distro group for no reason I've been able to fine. I found their E-mails attach...
Good day all, looking at configuring auto attendant on the isr router. any leads on where to start. configured the hunt group.it talks about the commands "param". ios running on the router doesn't seem to have those set of commands. I don't have a CU...
Hi Teamı have case with our provider that he cliams that the re-invite message contains only g711alaw but we want to send two codec with sdp (g711alaw and ulaw) How can we do that ? below is the mesage for ITSP"Checked via trace The B party number ...
Hello experts,Could you please tell me step by step how to configure a DID number to point to an extension.What configuration should I make in the Call Manager and in the Voice Router?A bit of context:Our service provider already placed the DID numbe...
Does anyone know if a VG224 or VG248 will "work" with CUCM 11.5?
Hello Experts,Need your assistance to identify the root cause of one issue which I am facing. I have noted that whenever we make an OB call , a Re-Invites happen even though there is no codec mismatch / hold or transfer. Call flow is as given below I...
Hello, I have a cisco 8821 device that I need to move to another group. When I call a particular number, I would also like the 8821 phone to ring. Is this something that can be done in the CCM? Do I also need to change the directory number of the pho...
Greetings, Trying to enable access to voicemail on cisco 7811 using the shortcode 97*. Could someone give guidance to how to go about achieving that. voicemail points to 999.There is a dial peer configured with session target to 192.168.10.10 destina...
Hello, what is difference between CP-6901-C-K9 and CP-6901-CL-K9 ? Would like to buy phone with following image. Is it "hand set" or "Slimline" ?
I need to upgrade my CUCM and CUC servers from 11.5(SU4) to 11.5(SU11). My questions are, Do I need to do the CUCM first then the CUC or does it matter which ones I do first? I have read through the upgrade guides and I didn't see anywhere that expli...
Dear Experts ! I have cisco CME router and i would like to configue Auto Attendant by using TCL script file . Can any one provide me thesample configuration and default TCL scirpt files . Thanks Regards;KV
Hi,In the process we ran into an issue trying the import and convert the cisco's CUCM ova into an ami with the following error message:“ClientError: Multiple different grub/menu.lst files found”import ID : import-ami-0ca2a7ba59a6f0f9cThe OS in ques...
We have virtualized our Callmanager and other Voice Applications onto 2 MCS servers running VMware ESXi 5.5. Since the Callmanager servers are no longer physical servers what is the procedure, or is it even possible to connect live music on hold fro...
