Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
HiI'm currently buy new Cisco CP-7829 but its need activation code while first booting. I have looking for the solution on the internet but still can't resolve. Any suggestion is appreciated.Regards,Aulia
We have a call center hunt pilot that routes to a DN if no members are logged in to the hunt group. Circumstances require the call center to route their calls elsewhere at unpredictable times on short notice.Goal:We want the DN's user to then be abl...
I am trying to insert phones through bulk and encountering this problem. No matter what I change in the template still run into the same problem. Any help will be appreciated.Insert Phones - Specific Details Begin Time : 12/27/2022 07:29:51 Query : I...
Hello, We have a setup where a checkpoint interface provides dhcp scope for the voice network IP phones and have a cme router. Firewall interface connected to cisco switch , to which the router and the IP phones are connected. Firwall can ping the IP...
Hi there, In our system we would like to implement a feature where, for example, i call a number and a bunch of phones auto answer and the broadcast comes out the cisco 8841 speaker. is such a thing possible? i can see problems in the threads with ci...
Hello all, first time poster here!Briefly, I'm an end user, please forgive me if I get something wrong. My employer uses CUCM and Unity Connection (I think its somewhere in the 10.5 to 11.0 version). Hoping to get an idea if this is possible before I...
We plan to migrate our existing CUCM 9.1.2 version to CUCM 11.5 (1). I have watched you tube presentations. They gave good presentations using their lab environment to do this migration task and they failed to explain the last twist that might occur ...
Hi! I am running Cisco IOS 15.2, with CME 8.8. I have had this issue on 15.1, CME 8.6. I am using a SIP trunk to my Asterisk Server for PSTN connections. I am using "dial-peer incoming called-number <REDACTED>..." but whenever I call into it, it give...
HiSuppose I have one active directory sync with call manager. I have done all initial synchronization and imported 1000 users in CUCM.Now I have 2 new joiners in my organization. So if i create those users first in CUCM , will those users get sync wi...
We have CUCM System version: 11.5.1.23900-30. The legacy phone system has several T1s where the majority of the DIDs are routed to. We have some going directly to CUCM, the majority of those to a Call Handler in Unity for a menu. There's a few Call H...
Preface with new to VoIP and am trying to create a small lab environment for students to get a little bit of exposure to VoIP and QoS as part of a networking course.Using a 2901 with CUCME 10.5. Have 4 phones registered and working fine - 2 7962's a...
Team, Please guide me with best possible options to integrate Third Party PBX & IPPBX with CUCM 10.X Alcatel/Nortel of any other Vendor . Need complete Network Diagram call flow and integration possibilities
I'm setting up the data from my BAT file for TAPs and I need to flag Extension Mobility as Enabled, I don't recognize where field to useIs there a field I can use to enable Extension Mobility for the phone device?
Hisome users are facing issues with connecting a call. when they dial using cipc the cucm routes them via sip trunk for which i have attached one packet analysis and logs below. the caller says that the call rings and then he gets fast busy tone. the...
Hi Team, we are facing one-way audio issue on hold and resume or conferencing scenarios. When CUBE on one call leg gets an OK with only one code (Ex. g711alaw), it offers all the codecs configured on an outbound leg instead of offering only the filte...
