Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We are using CUCM 8.6 and are experiencing issues with call processing delays for numbers dialed to the area codes 306 and 587. We are located in area code 780. We dial a 9, then 1 for long distance plus the 10 digits and can experience up to a 23...
I have an MGCP gateway with FXO ports configured for groundstart. Whenever I receive acall, as soon as you hang up, ten seconds later it will ring again (and no one is there). Any suggestions?
We are having trouble to get the following configuration to work properly:Have a CUCM 8.5 Cluster with different IP Phones (7965/7975/..) attached. Our Enterprise CA is based on Windows 2008 R2 Server, same Server acting as NPS / RADIUS Server. Acces...
Hello expertsi have a big customer who have (one pub and one sub) one unity conn and one CUP , all version are v8.6 . All systems are working so well. The customer asked us for a cluster for 10,000 phones , so our presales team helped him for a solu...
Hello,I have a CUCM setup that requires all users to use forced authorization codes for long distance calls, this is aplied on the route pattern for LD calls. The problem I'm having is configuring CUCM to have different route partitions to enable the...
Hello Guys,Does anybody know what is the maximum number of Clauses that can be created within one filter under UCCM-Call Routing- Filters Release 9.1ThanksCarlos
Hey Guys,I'm trying to found this information everywhere on the internet but i couldn't find it easly. In fact i didn't found it.Curently i'm working do develop a plan to trust the DSCP values comming from my UC servers that resides on UCS platform a...
Is there any command for CUCM to run from CLI which can give us which switchport it is connected to?Something like show cdp neighbor.I have tried different commands from CUCM CLI but none of them is giving this basic information.Is there a SQL query ...
HiI configured a hotline ( hotline PT , hotline CSS, translation Pattern ) in my CUCM 8.6 and I test it successfully on two phone ( 8945 and 7975)When I change phones (6921) it's not working I don't know the problem.I verify the configuration and cre...
HiWe are planning for power outage tomorrow , I have 2 UCS210 which include my ( cucm pub and sub, cuxn, uccx, cucm) .I want to shut it down (switch it off ) how to do that safely and what about VGW 3945.ThxSent from Cisco Technical Support iPad App
Hi, I am ordering for BE6k bundled with callmanager and Unity connection. I want to know if the bundle comes with an initial license for both applications (CUCM and CUC) or I have to order for the licenses separatley.Appreciate prompt response. rega...
Hi everyone! I have a client who is looking to hang several analog devices off of each port in a VG224... does anyone know what the limitation is? I fear that it will not have enough ring voltage. Thanks!
I have a client who wants Caller name to be displayed when their executives call in from their cell phone. Cell providers here (Canada) sometimes don't pass the calling name. I thought that adding that contact in personal directory may help us achiev...
I'm having an issue with some 6941 phones we're deploying for some of the clients. Here is the scenario:The phones are all directly connected to an 8port PoE 3560 switch. This switch is running DHCP for the site and all workstations can get an IP w...
Hi All - Can you please clarify the below Channel ID, Do we have different channel ID for each and every channel.Setup msg from PSTNChannel ID i = 0xA18397 Preferred, Channel 23 Setup Received send from VG to PSTNApr 15 12:25:25.092: ISDN Se...
