Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I recently purchased a Polycom SoundStation IP6000 phone. I connected it to various functioning WS-C2960-48PST-L (c2960-lanbasek9-mz.122-50.SE5) switchports - currently have many 7940G phones connected and working on the switch. The phone will not po...
Do all 29XX or 39XX normal voice router will comply h323 V4 or only ASR 1000 will support this features ? please light me.
Can we get CUCM 8.6 software alone and install in any equivalent server HP or IBM [ 7816 or 7825 ]? and request for license ?
Hi All,I have calls coming via SIP trunk in a 2611xm router that has 4 FXO lines for dialing out to campus exchange. The setup is working for both inbound and outbound calls. Users are dialing a standard pattern e.g. XXXX , 9XXX XXXX etc.Now is there...
Hi,We have an ISDN PRI E1 line as the primary link. Cisco 2821 router is being used as voice gateway and MCS 7825 as Call Manager Server. Now we want to use an IP trunk line as secondary link. Can anyone give me some idea on the configuration regardi...
Customer had - MCS-7825-H1-IPC1, CUCM 4.1 version, we need to upgade now to CUCM 8.6 business edtion with new server [MCS7828I5-K9-BE8E]If it possible to upgade CUCM 4.1 to CUCM business edtion 8.6 with "MIG-CUCM-USR-A ? or please light me the upgar...
Hello,I am trying to retrieve a parked call on an SCCP ANL phone off an EVM-HD-8FXS (or a VIC2-2FXS for that matter). I park a call using a 7962G, take the analog phone off hook, dial the park-slot number, dead air. I try to press the hookflash, no g...
Need to do a bulk import of tranlsation patterns but have never done this before and do not want to end up deleting any existing tp's. Do I need to export ALL the tp's then add the new tp's and then import all of them together again? Or do I just imp...
Can BAT be used to add phones that share a Directory Number, or to add the same directory number to multiple phones?
Hi,we have cisco 2900 series H323 router with CUCM 7.1.5 in our office. Also we have 5 Analog CO Trunks which are terminated in FXO ports.These 5 CO Trunks are used as backup incase the primary PRI failes. So that any ip phone can make/receive calls...
i instal a connection on my Vmware,everything is ok but when i instal a language i can't find where the Connection Mixer (CuMixer) and Connection ConversationManager (CuCsMgr) services.i know the service is in TOOL menu click service mangement .but i...
someone can help me , my fax machine receive fax from PSTN always lost words,but from intranet is OK, the machine is OK , fax machine ------ VG224 -----SCCP-----CUCM------ROUTER-------PSTN this is my topology i think the porblem is router , my fax p...
Hi,This is regarding one requirement of customer,they are looking for configuration a Line group and assign the call Pickup on those Line group extension; as well as other Team Extension.So,here the concept is when the call trigger to the Line group...
Hi,i have customer having Nortel switches 5520 with Nortel IP phones. The customer is having Nortel NSNA used to provide security for the network. For Nortel IP phones the customer is using signatues (ex. Nortel-i2004-A)We are planning to replace Nor...
Hello,My client has a UC540 system. We are trying to connect it to internet. We have got a static ip address, subnet mask, default gateway, primary and secondary DNS ip address from ISP. Can anyone help me configure UC540 so that we can configure our...
