Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,i starting to build a lab with CUCM 8 and a 2008 SRV with DNS, DHCP,AD,.....now if i start the phone with a factory reset, the right ip is set from the dhcp and the right options.....it loads the phone load and then restart the phone and try to op...
Hi,I've an issue on a nme-cue which is installed with a cisco 2821 router, I can't access to it with cli, I entered service-integrated service engine 1/0 session, I've entered the login and password but the nme-cue didn't respond, in the output there...
Hi! I have two 7942s that hangs after factory reset. It only says "upgrading" and then it hangs there.All the other phones works.I have done debug tftp events in the pst gw , but nothing comes u´p.The DHCP server is the customers own, so I do not con...
hi all,i need to do multoparty confernce using cisco ccme 7.1 (cisco2951).i my system 3 party conference is working means 2 outside numbers and one local extension , but i need to configure for 5 people from outside and one from local . that is not h...
is there a loud speaker that can be connected to a cisco 7942 ip phone? the phone is at our plant and due to the noise from the machines the user can barely hear it when walking around the plant. thanks!
Hi all,Is there any way to configure my CISCO IP Communicator to run a batch script when call comes?If yes, what data I can pass to it?Thanks ahead.Pawel.
When we received a call that is sent to the auto attendant, if the number called is a 9-digit number (standard in Spain) or a 4-digit short number (used for communication between mobile) operator's circuit seems to operate correctly.If the call we re...
Hi All, We have a CME version 6, in which conferencing is not working now. We can make conferencing upto 7 phones but could not add more than that to conferencing. When ever the 8th phone is added to conference the error message comes up with 'could ...
Hello,I have 2 MCS7825 I4 with CUCM 8.03. one is publisher and another is subscriber. Yesterday the publisher cli shows this error :EXT3-fs error (device sda6) in start_transaction: Journal has aborted. I use the system recovery DVD to check the file...
I found a peculiar problem when using "dtmf-relay rtp-nte" (that is pretty much an universal standard) from a CME box to a PRI gateway, only when calling AT&T teleconferencing service.No digit is recognized, I believe the digits duration is 160 mS. A...
What are the reasons for an Auth Fail message when the phone is trying to load firmware? I know you can get that message if you didn't put the correct MAC address in the CUCM or if you have the model number wrong, but I have verified both of those th...
We are having issues with one of our locations not able to send faxes to our corporate office. the remote site is using a basic fax machine and the gateway is configured for fax passthrough g711ulaw. Our corporate office has a fax server configured f...
Does anyone have some suggestions on configuring basic call queuing in CUCM 7.1 with Unity 7?I have a CH with different options. Option 3 goes to a DN and if they don't answer the caller has the option to leave a message. The problem is the person th...
Hi ,Fo Inbound CallsPSTN------POTS Dialpeer------VOIP Dialpeer------CUCM and then extension For Outbound CallExtension to CUCM------VOIP Dialpeer------POTS Dialpeer------PSTNVoip dialpeers are used between gateway to CUCM connection. Am i right?If so...
Is there anyway I can get this emailed weekly? I already have RTMT alerts kicking in when I reach the 90% threashold
