Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi All,router: 2811, ios:c2800nm-ipvoicek9-mz.151-4.M.bin.After router receives SIP INVITE with max-forward:0, tries to establish call connection. Does anybody know how to force router to send 483 Too many hops ?Thanks for help.Regards, Robert
Hi, I need to build a script using menu with 20 connections; I checked the menu tool in UCCX I found only we can create 10 connections not more than thisAny idea how to do that ?
Hi all,I recently bought a new cue model and installed in my 2821 router, when I go to cisco licenses website to requist the licenses, I select the Register for Upgrade/Migrate License , after I input the model and sireal number , it let me input th...
I have a Cisco 9971 with the CP-CAM-C camera. I'm able to get power via PoE from my ESW-520-8P but it will not power the camera. The port has 15.4w allocated to it. Will this switch simply not work for the phone and camera? if so which switch must I ...
I have the Cisco IP Communicator 7.0.5.0 and I'm running Cisco VPN 5.0.04.0300. I get dial tone and DTMF tones, but no audio on the call. No audio on either end. I've tried this from 3 different networks using VPN and it worked on 1 out of 3. Any...
Dear Netpro gurus,Would anyone be able to shed some light on where I can find some documentation / notes on how to upgrade existing CallManager 4.1 to 8.5??Would greatly appreciated if anyone can help on this =)Cheers,Hunt
With the UC500 voicemail/e-mail notification is it possible to to have the message go to a separate inbox Outlook? Our customer used to have a Nortel BCM and I believe it had an IMAP client loaded on each individual computer so the user had two separ...
Hi,I am running Cisco Call Manager 7.1.5 Version.In the cluster there are total 1 Publisher and 4 Subscriber and 1 TFTP server.The db Replication status on the Publisher and one subscriber shows as " 3 - bad " The remaining 3 Subscriber and 1 TFTP S...
Hi All,I just wanted to check my logic here and see if this is possible to be completed on the voice gateway instead of CUCM. I was wondering if there is way to configure the external number mask equivalent locally on a voice gateway. All of the user...
Good AfternoonPlease help me.I have a single site IP telephony infrastructure based on CUCM 8. The topology is attached.Now I want encrypt VoIP and signaling traffic. As far as I know, it is the CUCM integrated feature and the PKI infrastructure must...
How do I tell when the databases are sync'd up in Unity Connections? We have UC 7.1.5 in a duel cluster and we are going to replace both servers. I don't want to do a backup and then restore to the new servers. I want to replace the 2nd server and s...
We have a Publisher and Subscriber running 7.1. Im fairly new to the environment so any help is appreciated. I read that all changes/additions, etc should be done on the subscriber and not on the publisher, is that correct? So I should only log int...
Hello,With CUCM 7.1.5 can the number of phone device rings(set in the CUCM Administration under No Answer Ring Duration) be set and/or modified by an end user using their respective access to CUCM User Options web interface? If not, is there any oth...
Do you need to order a licence to use a VG202 with CME? If so, what is the SKU? I know you need one with an ATA but i can't find any info on the VG202.Thanks in advance,Jason
Hi,Can 3rd party applications (such as Resource Scheduler) make call to the Call Manager AXL service in order to find IP Address of a device?Regards,Ajay
