Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,-CUCM5.1-CUBE, 12.4(15)T3CUCM is connected to Carrier SBC via CUBE and have a question regards the MTP requirement.The only requirement for MTP is to provide 'intercept message' by carrier when dial out a long distance call without '1' in front of...
I am trying to make it so that when I lift the handset on my 7941G it doesn't turn off the headset light that is enabled and lit up. Is this possible? I am trying to use a wireless headset with a lifter, but when the lifter pulls the handset o...
Hi There,I'm in the process of deplying presence 6.0(6) and have come across a bit of a problem with the phone line presence state, busy,available,DND etc presence states all work fine.Phone line presence on the UPC devices show 'on phone' status cor...
Hello, I have a TOIP Solution based on a CUCM 7.1, IP phone CP 7945, and an MGCP Gateway Cisco 2811 with a VIC2-1MFT-T1/E1 used to connect to an Ericsson PBX that control 100 analog phones. The CUCM use 2XXX as a dialing plan for IP Phones and the Er...
Hello,I am having Cisco 2801 router with IOS "cc2801-ipvoicek9-mz.124-20.T5.bin", i have installed VIC2-FXO on slot 2 [ this slot accepts only WICs and VICs] and VIC2-2FXS on slot0 [This slot only accepts VICs]but the problem is that they both are no...
HI,I want to implement one scenario, Supose 2 locations A and B both are in same city say in Delhi, and we have 2 MSC servers for IP phone and customer want 1 MCS server should be installed at A (publisher) side and other should be installed at B (...
Hi All,We have recently installed a Call Manager 7.1(5) with a 2801 service router. We are trying to connect it with a Phillips PBX using E1 ECMA QSIG. The 2801 gateway is being configured via MGCP. We are having some issue:1.- Calls from Phillips to...
Hi,I have a Cisco 9971 IP Phone not working on a CUCM 8.0.2. The message on the phone: TFTP-Error:ram/SEP00...C.cnf.xml. The previous message says: CTL installed. The phone is working on an other CUCM 8.0.2 in secure and unsecure mode. Any idea? G...
Hello,I am having Cisco 2801 router with IOS "c2801-ipvoicek9-mz.124-20.T5.bin", i have installed VIC2-FXO on slot 2 [ this slot accepts only WICs and VICs] and VIC2-2FXS on slot0 [This slot only accepts VICs]but the problem is that they both are not...
Hi,We have one Cicso router 2851 with CUE module for the voicemail and Autoattendent features , we have configured one number for Autoattendent and one for Voicemail. so my query is can we any redundancy for cisco unity express if any failover of th...
Hi.VWIC2-1MFT-T1/E1 does support SS7 signaling?. If it doesn´t, which does it?.Thanks in advance
i need some help guys. Anyone who can answer me please.I have a welltech softswitch which consists of a Proxy server (handling registrations) and a billing system.I have a cisco A5400 that is currently giving clients E1 facilities for a network that ...
We are using CISCO 2821. The system started to have problem connecting to voice mailbox (when dialing internally to the VM extension) and it used to take a reboot to bring it back. Now it will not connect to voice mail (gets fast busy signal), plus i...
Hii want to know about what is the impact of changing ip address of CCM 4.3 and hostname. also IPCCX application is running on same machine. what procedure should i have to follow to change the ip address without any impact on CCM and CRS application...
What are the procedures to install the CIPC in CCM Express version 4.1. Kindly suggest how to get the ios and the best methord to do it. The flash is :c2800nm-spservicesk9-mz.124-11.XJ4.bin
| User | Count |
|---|---|
| 12 | |
| 8 | |
| 7 | |
| 4 | |
| 1 |
.jpg "VIP Expert"){kind=icon}
