Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We have a cluster of five UCM's on a 7835H2 platform. What is the limit of simultaneous calls that the UCM can proccess before it starts to throttle?Thanks,Albert
Hello all,Looking to migrate many analog phones from a failed PBX using CUCM to register them.. There are more than an handful of phones in the hundreds.. Is the FXS module WS-X6624 that hold the most analog module are there any other MGCP hardware t...
Hi All, I have a UC500 I inherited and I've set up a Voice Hunt group off the Auto Attendent. However, when a call comes in and the outside caller presses the option it rings the hunt group twice then hangs up. It does broadcast the call to all the...
I am trying to use TOD for the following:I need DN 2880 to ring normally between the hours of 8:30am - 5:15pm Monday - Friday.Between the hours of 5:15pm - 8:30am Monday - Friday & all hours Saturday - Sunday I need DN 2880 to route/forward calls to ...
I need to setup two sites each having a UC520 system that need site-to-site calling via extension number. I have never done this before so I don't know what to expect. The sites are already interconnect via a QoS enabled VPN.The one thing I do know ...
I have a ccm 7 i config it to route call to cme at one location through wan ,but i tested there is no answer thr destin phone is ringing but no reply i heard a fast busy signal , i want to know do we reqire a retun path to ccm from ccmethank you
hi,i can make a conference call between three party when all the there parties are registered to cucm (ie ip phone).. i can also successfully make a conference all when one party is from PSTN and the remaining two are ip phones. but when two parties ...
In CUPC, is there any way to populate the general group with all the users in the directory ? or end users have to search individual users from directory and add them manually?
Hi all,We have recently installed a CUCM 7.1(3) in a customer. That customer had a CUCM 6.1 which they used as laboratory (it is obviously installed as publisher). Now, they have decided that they want to upgrade it to 7.1(3) and install as subscribe...
We have a mixed Cisco/Avaya campus with an MGCP gateway providing connectivity between the legacy PBX and the Cisco voice network. I have a wireless upgrade going on, and plan to replace a number of spectralink wireless phones with Cisco 7925 wirele...
In Unity connections 7.1(3) with CUCM 7.0.I am looking to have a group of users not only have their own mailbox but also a group one ( for IT helpdesk). I want to avoid assigning a second line on the phone, to the helpdesk number.I would look at havi...
Hello. I am running CCM 7.2 with Active Directory integration. I would like to prevent certain names from showing in the Corporate directory. How can I accomplish this?
Using CUCM 7.1, when we disconnnect the call manager. SRST doesn't work. Ephone register with CUBE router however, no dial tone. I attached a configuration of the CUBE router to the thread. Any ideas?
Hi,Recently I have been playing with Cisco IP Phone Service.I have a question about Cisco IP Phone Service XML object "CiscoIPPhoneExecute".1) I know I can make a phone ring by this object, but what other things can you do with it?2) Is it possible t...
Hi,I have the following case. My customer wants to make interconnect between two CUCM 6.1 clusters through IP to IP gateway. The restriction is that one of the Clusters can't use MTP resources. Also we want to preserve the supplimentary features. Th...
| User | Count |
|---|---|
| 6 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
