Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We are using Cisco Call Manager 11.5 and have recently configured IP Phones to connect to the ASA VPN using certificate based authentication. We configurd CAPF, took the CA from CAPF and imported it on the ASA. We can connect remotely using certifi...
Hi Freinds how to read/Decrypt the below rules ? voice translation-rule 1rule 1 /\(^001\)\(.*\)/ /\2/voice translation-rule 2rule 1 /^159\(.*\)/ /\1/rule 2 /^1234/ /81&/rule 3 /^9222/ /\0/ThanksIbrahim #stayhome,StayConnected,staysafe
Hello everyone,I want to use Store and Forward fax (T.37) but on VOIP dial-peer. It's possible? Some advices?
Hi, We have to use existing analogue phones in one of the deployment. Do we need UCL Essential license if we are using VG350 as analogue gateway. Previously it wasnt required with VG224 or VG248. Thanks, Amritesh Anand
Hi all, I have a CME on which SIP call arrives which I forward to CUE where I have IVR configured. This IVR plays some messages and offers some choices, however none of the digits I press on my phone comes to CUE. Call flow: PSTN - CME - CUE CME rece...
I bought a CISCO 8861 phone for my surprise the phone works fine, I can see its IP and enter its settings, where my problem begins, I try to access the web interface and there is no way that I can, I need urgent help, can you help me?When I try to ac...
I currently have this open with TAC via SR 687172665, but they have been unable to dedicate time to this issue over the last few days.I may requeue it this weekend, but have tried to be patient to get the best answers.We are currently using SPAN reco...
Hi, would like to know JTAPI messages and material, like what type of messages is sent to CUCM via remote application, and what type of response CUCM sends to the remote application. Specifically interested to know the background for the following pa...
CUCM Version 10.5.1Genesys 8.1.100.17T-Server 8.1.201.12 We have tons of problems with our Genesys contact center users. Our Genesys admin/programmer blames Cisco's jtapi messaging.I manage the Call Managers and I am far from a Genesys admin/programm...
Sorry for another post on transformations, but I can't find my answer anywhere. I'm trying to make it so that when an incoming number hits a phone, the alerting number displayed will be unchanged, but the number in the caller history will be transfor...
Hi Everyone,When I connect my IP phone 8841 directly to cable modem (Motorola), the Phone get registered in CUCM. but when I connect the IP Phone with WRT54G2 in between, the Cisco IP phone does not get registered in CUCM.It says "verify your service...
I have the following problem. If I use IM & Presence as a Login server I have different phone number information than if I log in as CUCM server (12.01). The CUCM shows the right number the ipPhone Im&Presence shows the Main phone number. IM&Presenc...
Hello for everybody. My question may be wrong, but lets look at the next situation. There is cucm 9.1 with sql database on ms sql server. Someone accidentally or intentionally deleted the sql database for this cucm. What next developments are possibl...
Hello The company where I work is going to contract a service provider to access the PSTN through SIP. This is the first time I am going to deploy this kind of connection and I will do it using CUBE device but I am wondering which place in my network...
I have this output in show license detail cme-srst show license detail cme-srstFeature: cme-srst Period left: 8 weeks 3 daysIndex: 1 Feature: cme-srst Version: 1.0License Type: EvalRightToUseLicense State: Active, In UseEvaluation total period: 8 wee...
