Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
HiI have 2 CallManagers in different cluster, connected through inter-cluster trunk. I have a manager that need the same DN at each site to ring at the same time, so in case he was at any site, he can answer his calls.Any ideasPlease advise.
I am using perfmon and use system monitor to realtime track number of parameter of all servers in my cluster from publisher.I have issue where I am not able to see any info of sub01 but can see all info from sub02,it says cannot connect to server alt...
HiCan you tell me if Extension Mobility is supported on the UC520 and if not when this is planned to be released. If it is supported can you point me to any documentation that will help me configure thisthanksIan
Hi, When I transfer a call in CUCM6.1 to another party the call is dropped if unanswered anywhere between 6-10 seconds. I'm assuming that this isnt a timer issue due to the variance in times experienced. I've tried the various associated service par...
Hi,I want to make VoIP calls between my Cisco Call Manager sited in Dublin and an NEC PBX sited in New York. In order to integrate them I am considering placing a Voice Gateway in New York and running a MGCP session over my WAN. The Round trip time...
On a 5.1(3) cluster, I've been trying to figure this out but have not had any luck. I need to enable CDR_CAR backups as well as CCM. The problem is that under the feature list selection, the only available option is CCM.What am I missing?cheers,Wil...
What is the command to reset voice ports on a vg224? I know the shut/no shut commands. But I need the command to interface to a port so that I may issue the shut/no shut. Any assistance would be great!
In CallManager, is there a way to log calls going through your Inter-Cluster Trunk or Trunk that is using your Gatekeeper? I just want to find out the number of calls or maximum calls at one given time to find out if my VOIP trunk is being over-subsc...
We are on CM 4.1(3)sr7 with our voice on PRI and are still using PSTN for faxing. I am looking for someone who has ATA's working in a similar environment. Can you tell me what model you are using or recommend the model best for our version and purpos...
There a number of ES loads for the 6.1.2 up on CCO. Anyone know where the readme files are for the ES and what they fix? Or do you have to download the file, and extract it?cheers!
Lets say I have 3 T1 PRI coming in from the PSTN, not an nfas group. I want to route all outbound calls to the PSTN. How do I group the 3 PRIs into 1 logical link?
I have a BlackBerry on our wireless LAN. Is there a SIP phone client for it that I can use with our CUCM 5.1.3? I want to avoid adding other hardware or software to our cluster.
is there anything equivalent to the trace analyzer with xml files that was available on cm 4.x
In call Manager express Earlier(3.2/3.3/4.1,4.2) Call blocking is supported on IP phones only and not on analog foreign exchange station (FXS) phones.Now we upgraded the Call Manager express 4.3/7.0 and after upgrade we are not able to make a call fr...
Hello,I have installed CCM 6.1 and configured some 7911. I configured EM and users can log/logout fine to those devices.then tried to put in work some 7936, the problem is I can't use EM with these device. I configured user profiles and logout profil...
