Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
wer are running 12.? on the system. We had to upgrade our certificates to fix an issue with Extension Mobility, restarted the Tomcat service and Ext. Mob. works, but since the corporate directory has failed. I have tried restarting the TomCat service...
I need to extract and then update the Enterprise Alternate Number for a large number of DNs. Can I request some help to know in which SQL table is the Enterprise Alternate Number stored. I thought it will be in table numplan but I could not find it t...
Hi, We have set up MGCP on A5400 To work with third party Media gateway controller. We are only using AS5400 for processing media and the MGC will control AS5400 via MGCP Protocol. We are only using for IP-connectivity so we configured one PRI interf...
I have CUCM 11.5.1 and I installed latest software for 8865 plus devicepack and now when I go to CUCM ccmadmin>Device>Device Settings>Device Defaults> I do not see the Phone 8865 listed. Why? cmterm-8845_65-sip.12-5-1SR2-2.k3.cop.sgncmterm-devicepac...
Dear Community, Is there a way in a cisco cube when configured with SIP registration each SIP invite to follow the SIP registrar ?I believe that even we are registered in a server when SIP invites arrive in Cube the process starts again from the beg...
Where can I find a list of video Endpoints that are supported by WebEx meeting?
Hi, looking for help!Our company has Cisco IP Phone 7914 and they had purchased it a long time back. Now, I was trying to update the extension names as it was already outdated. The problem is we don't have the software or either any login through Cis...
Hi Community, We are planning on updating the CUCM 10.5(2) to 12.5 and also switch our old UCS C210M2 with the UCS C220 M5. What is the most efficient way to achieve this? Thanks,AB
Hi Community, I 'Think' I have got an interoperability issue with my ITSP. Pick up call from ITSP to IP Phone under CME come up with no audio at all. Below is the details:Configuration set.Router CME.SIP Trunk to ITSP.Endpoint is Cisco SIP IP Phone.C...
Hi All, need help related to b-acd, i am new about this. if i call to pilot number, there no tone then call disconnected already configure based on cisco doc: applicationservice aa flash:bacd/app-b-acd-aa-3.0.0.7.tclparamspace english index 1para...
Hi, Can any one let me know what is port channel in CUBE and what is the purpose of it? Why the port Channel binds to dial peers? What is SFP in cube? Why it is used for? my cube is already configured with a SIP which is taking calls now. But the req...
Dears ,I tried to update the firmware of phones 88xx and 7821 series .I have uploaded the new firmware and restarted the TFTP however the new firmware still not shown in device default.cucm ver 12.01files are uploaded and installed (cop.sgn) format ...
Hi guys,I am currently trying to set up a SIP trunk with T-Mobile in Czech Republic but outbound calls are not working.At given time all numbers of the traditional PBX will be ported to the SIP trunk but ITSP said that we can already make outgoing ca...
Can a Route Pattern be assigned to a Gateway that ISN'T in a Route Group or is it essential that the gateway is part of a Route group before the route pattern is assigned?
Hello,I have a new customer with 10.x releases of on premise CUCM, Unity Connection and UCCX. These were implemented by another partner and the SWSS (or ESW and UCSS as it was at the time) has expired.The direct touch Cisco account team are urging th...
