Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We are upgrading many of our 7960 phones to 8945's. I had been setting up the new phones manually but recently learned about the copy and super copy features. I am not able to take advantage of the copy features however because the copy of the phon...
Hi Everyone I am trying to make call from phone A cluster 1 to phone B cluster 2. Call hits the Phone B and will click speaker button there is no audio and in phone A can hear call ringing tone, and the call gets disconnected after 8 seconds. I have...
Hello, We have a VIP who wants to be able to receive calls and use their primary line while have any call new incoming call roll over to their second line. We do not want to use Call Forward All as this defeats the purpose of having a primary line an...
Hi there, Ive the following Problem: We ve installed a Callmanager with Version 9.1.2 and Cisco Wireless SIP Phones 8821 are registered on it. Ive installed the locale from march 2015 (latest for 9.1.2), but the phone language wont change from engli...
Hi everyone, I have encountered a small issue with newly deployed CISCO 8821 phones, registered to a CUCM 10.5.2 The devicepack (cmterm-devicepack10.5.2.15097-1.cop) is installed, so I can successfully set up 8821. That works as expected. I have ins...
Well, my current network has a 2811 router with a PoE switch to power IP phones. With the physical phones i have a vlan10 with the ip 192.168.10.0 255.255.255.0 that gives the phones an IP and then the normal VLAN for data 192.168.2.0 255.255.255.0 ...
Hello, Helping a customer with an old UC560. They've advised that MWI isn't working. I didn't deploy the system, however the configuration all looks in order. They have the DN's for MWI on/off, the MWI string in the CUE application is correct, t...
dear all i have problem to access url cucm http site !telephony-service max-ephones 58 max-dn 64 ip source-address 192.168.2.207 port 2000 url services http://10.1.10.1/voiceview/common/login.do url authentication http://10.1.10.1/voiceview/authentic...
Hi, after a upgrade to Unity Connection 11.5 the LDAP import of user with special characters in lastname e.g. ö/ü/ä fail: Monday, October 9, 2017 9:14:43 AM CEST ERROR importing user (USERID) with extension = 2XXX: The specified column value is inv...
I just installed an 8831 conference phone in my CUCM 9.1.1 environment. The phone is registered and everything works but the time is off. It's seems like it is using GMT instead of my time zone.I've verified the device pool has the correct date/time ...
I'm working through the CCNA Voice lab workbook and I'm trying to test calls from one pod to the PSTN simulator. When I dial the digits, I get a fast busy and "unknown number"displayed on the phone. Debug dial-peer confirms my dial peers aren't being...
Hi, I installed CUCM and ipphone 8811 , 7861 and 7811I configured phone button template for 8881 ,7861 and 7811.for example i can add 10 speed dial button for 8811 . But i can see only left button (5 SD) on the phone. i can not see righ button.You ca...
Hello all, I have installed and configured CUCM v 11.5. the customer asks me to set up a scenario for the three operators standards. we have three standards : 8001 , 8002 and 8003. -he wants these three standards grouped on line 3000. and the...
Hi Guys, we are installing H323 gateway with Pri with 3 incoming digit but internal extention are configured with 4 digits in cucm. Please advise the voice translation-rule. pilot number: 4101000 incoming digits: 001 Internal Extention: 1001 voi...
So here is my story... I have created a home Cisco lab and would like to branch my VoIP network out to softphones as well as physical IP phones. The issue comes where I want to download the ip communicator software to implement but I can't download...
