Unified Communications Infrastructure

I have a CUCM 8.0.3 with around 900 registred Phones / Users.Today, everybody was prompted to change their password, when they login to the webdialer ("Password change required. Please change it from CCMUser page")I don't want that all the users have...

Hi All,The Meetme conference is not working, when show dspfarm, the status is ASSOCIATION IN PROGRESS as below:router#sh dspfarm allDspfarm Profile Configuration Profile ID = 1, Service = CONFERENCING, Resource ID = 1  Profile Description :  Profil...

Hi,Is it possible to implement RCC (remote call controll) with a Office 365 lync deployment?Thanks,Jeroen                  

Looking for a tool that logs all the changes made in CUCM.  It should track the user ID that made the change, time the change was made and the actual change to some level of detail (Device : Phone : Device Name : field)  It would be nice if the data ...

Hi, I am trying play TTS stream through user.microapp.inline_tts,but i never got success.TTS is working fine with external Vxml scripts.I am using simple play media micro app,tried with Get speech also but same results.I use Naunce ASR/TTS with demo ...

Ok, this one is going to get a little complicated, and I hope there is an easy answer:Hurricane Sandy drowned a customers datacenter with 6' of brackish swamp-water.  ALthough a good portion of their servers were saved, 75% of the phone system was de...

Does anyone have any tricks to enable the users calendaring information in presence status for everyone in bulk? Seems a bit clugy that users have to log into end user options to make this happen. Thoughts?Sent from Cisco Technical Support iPad App

hii am trying to setup a trial install of cups i have an HP DL380G5 with 1 quadcore xenon l5420 2.5ghz with 4gb of ram and 2x 146gb HDaccording to this table http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_solution_over...

Hi, for  jabber 9.1 integration i sync'ed all users at Callmanager, Presence and  Unity to our LDAP (MS AD). with CUCM and Presence (both 8.6.x), it  works fine, just Unity Connection sync the Users from AD, but i cannot import Users  with german spe...

Hi,I was using Cisco IP Communicator 2.1 without problems.But when upgrading PC's  to Windows 7, I have also to upgrade Cisco IP Communicator becausethere was a error message at startup of IP Communicator and no access to Internal Directory.The issue...

I'm having trouble with desktop phone control. I did a wireshark trace and its doing a SIP register with my old mac SEPXXXX.I swapped phones by changing  the MAC address field in CUCM and re-associated it under end user.Any ideas?Thanks,Mike