I am preparing to enable FIPS mode on my Call Manager (1Pub 4Subs) which is running Version 14 SU4.For reference the cluster is in mixed-mode.I want to see if anyone has experience doing this. Normally I enable FIPS mode when I first build the clust...
Forum Posts
Hi! I set the hunt pilot with native call queuing a couple days ago, and only today started receiving complaints about agents not being able to transfer to those hunt pilot numbers. Before enabling call queuing, it was possible to transfer calls to t...
Resolved! Your Call Cannot Be Completed As Dialed when transferring a call via the Attendant Console
When attempting to transfer a call to a user via the Attendant Console we get a your call cannot be completed as dialed. She is on a 7962 with a SCCP device protocol
Hi Anynone I want to know how to flow calls with mute, is there any documentation regarding that I tried to find it but had no luck. if know the flow call with mute how does the RTP stop sending with a party or the document regarding explaining the f...
I have a directory number that is shared across multiple phones. We're trying to send calls from specific numbers to voicemail. I have a voicemail box set up, but when we test it nothing happens when pressing iDivert softkey button. Doesn't iDiver...
Dears, Hope you are doing wellWe have no issues with jabber inside the Local network as everything works very well, also when using external network and calling internal numbers from jabber and answering from the Cisco SIP phones also everything is w...
we have a set of CUCM BE6000M version(two be6000m server) , can we move cucm ,cup VM to a common esxi host? and rehost license to that common esxi host? or we have to buy another BE6000M? we run out of service contract for our BE6000M, can we rehost ...
Currently I have a 2 node CUCM 12.5 cluster running on ESXi 6.5 that I'm looking to get to version 15. Based on the v15 upgrade guide this is possible, but CUCM v15 isn't supported on ESXi 6.5, or at least not tested. Is the best option to try to d...
Resolved! CUBE HA with 2 ITSPs
I will be implementing a second ITSP provider on an existing HA pair of CUBEs. The new provider will be connecting on an available Gig interface. The existing ITSP is pointed at the WAN VIP from their equipment. For the second provider, do I just nee...
I have this number 4555,,,6668888 configured as a speed dial on an extension line "2008" in CUCM 11.x.I want the speed dial number "4555,,,6668888" to be auto dialed without any manual intervention whenever someone calls 2008.How can I achieve this?
how to acquire third party SIP end points -CUCM ver.15 .COP file version?
Hello,Trying to upload a device package (File: cmterm-devicepack12.5.1.17083-2.cop.sha512) to a CUCM v12.5 (running only the Pub server) using both Solarwinds and/or Titan SFTP, but I get the following "error encountered: an unknown error occurred wh...
I need some help determining the process and impact of changing my Call Manager names under System > Server.For reference my cluster is version 14. All nodes within the cluster were installed with a host name and the domain name is configured. Addi...
Hi, I have two phones with two extensions. User A DN 1000 and User B DN 2000. All the voicemails of User A mailbox on 1000 need to be forwarded to User B mailbox on 2000. I have removed the voicemailbox of User A and added it as an alternative extens...
Resolved! cucm 12.5 to 14
hiI wanted to ask if there are analogues of the test lab. Tell me where you can test the update, and are there any instructions or videos that you can watch ( update cucm 12.5 to 14)Thank you in advance
