Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Getting 404 not found on sip trunk betweem avaya and cucm.Log was deleted because of security reasons.
Hi all,I would require your help in order to solve a situation which I'm currently facing.The current scenario is that I have a SIP Trunk from a Cisco Session Management Edition (version 8.5.1) -> Huawai UAP6600.Unfortunately the remote site (Huawai ...
First and foremost, I was asked to take over our IP telephony infrastructure, as well as our network infrastructure. I'm VERY new to all of this. I was a database administrator for many years. Unfortunately, my company won't hire someone with more...
Hello,Our standard phones have been the Cisco 7911 and 7941/2. They are now eol and we have started to purchase the 7821 as and when required.On the 79xx series when you begin dialling a number on the phone menu it will provide you with a list of n...
Hi,I have CUCM ver 7.15 running on VM. I now have a requirement to upgrade to the latest version of 10.5. My question is, can I use PCD for this?I will be hosting the 10.5 on a new server and keeping the same hostname and ip address. Many thanks.
what kind of card type is needed to channelize a DS3 circuit? i thought you usually need a MUX but with 4451 you don't?
So this is the first BE6K-S I have seen, very kool! Basically a ESXi host built on a module that is inside the router! Along with a VWIC and you are a phone system for 100 or so users including Unity. This was "pre-configured" system and we re...
I am having an issue where one way audio is introduced immediately inbound to one of our DMVPN spokes. Audio is two way only from a 9971 to 9971 using g722, routing the exact same way as the affected phones -- 79XX. Note when a 794X calls inbound to ...
i have an HQ ( main university ) and it has CUCM 9.1 , university has two connection one connection to PSTN and another connection to WAN that connect to small Branch ( collage ) , on that collage there is no PSTN at all, on the branch there is only ...
I have a customer requesting to disable Privacy so that users can not block users from adding them as contacts. I see in the Jabber for Windows 11.0 deployment guide, you can do this in a Webex deployment: http://www.cisco.com/c/en/us/td/docs/voice_...
Sip provider during incoming call to our branch office sends our number like 12345$localcity@192.168.96.30 in To field. And waits this symbols such ANI during outgoing call from our office.As I understand the only incoming dial-peer matching this sym...
Hi,Recently i configured CUCM with MGCP ( CUCM-MGCP-GW-ISDN). But the incoming number ( calling number from pstn to internal) displays only nine digits ( first 0 dosent display, eg : 413428912 instead of 0413428912).Please adviseThanksSuchira
Recently we updated our CUCM from version 10.5.2.10000-5 to version 10.5.2.12901-1 Before the update we were authenticating our users with no trouble using LDAP AD LDS over SSL. Immediately after the update, authentication has been broken and none of...
Greetings, I have a request to forward all calls to a remote destination (mobile phone). The catch is that the user would like the caller ID of the original caller to show up on his mobile. Is there a way to make this happen?
Hi,I did fresh installation of CCM 10.5.2.10000-5 and surprisingly i notice the software conference bridge is in unknown state.I tried restarting IPVMS service but its still same.Second, when i tried to deactivate and active the Publisher services, i...
