Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi all,I was wondering if anyone has ever come across this problem before.We have a cluster of 2 CUCM version 8.5.1.11900-21, they are both located at different location connected via a WAN link.The connectivity between the CUCM is fine so is the DBr...
Hi,I am going to make an upgrade from CM version 4.1(3) to 7.1(5b) using the in-place servers and I have a couple of questions.I have 1 Publisher and 1 Subscriber and I have to retain the same IP addresses, which are assigned to them now.In this guid...
Hi, im having a few issues with Cisco CallManager Attendant Console on CCM7. Individual numbers work ok no problems. I need to set this up now in a live enviroment with 2 phones/PC's. I have set a "Line Group" a "Hunt List" and a "Hunt Pilot" and ...
hello Guy, has anyone ever encountered this scenarioProcessor load over 90 Percent. tomcat (96 percent) uses most of the CPU. Processor_Info: For processor instance 1: %CPU= 99, %User= 99, %System= 1, %Nice= 0, %Idle= 0, %IOWait= 0, %softirq= 0, %irq...
Hi,Does anybody know any good software for directories and caller ID?
We have a 2811 gatekeeper that we are trying to upgrade the IOS to version 15.1(3)T. Below are messages we see during boot process.----------------------------------------------------------------------------------------------------------------------...
Hi all,I got a brand-new bundle C3925-CME-SRST/K9 with IOS 15.0(1)M7 and UC license from factory default. Now I'd like to upgrade to IOS 15.2.2(T), my concern is about UC license. When I change the IOS file, the UC license is still activate or not ? ...
Hi There,For over 2 years i've been running a CME 4.2 router happily. I have a number of different hunt groups and users are able to login and out fine using the Hlog soft key. Today I have a group of users unable to receive calls via a B-ACD ser...
Hi,I am using CME 8.6...My extension numbers are configured with 3 digit..My PRI range is 1234000-199 & my extension numbers are configured as 000-199. How can i do the translation on CME so that anyone calling from PSTN can reach directly to my exte...
I changed ccmadministrator's password, I still can log in CM Administration web gui,but I can't log in OS Administration web gui, I can login this before I changed the password,and now I forgot the previous password,can anyone tell me how to log in O...
Dear all NetPro gurus,Just curious whether anyone knows the difference between the following Cisco Part Codes:-•- L-LIC-UWL-STD-ADDOR•- L-UWL-UPG-CM-STDI have a customer who wants to buy Phone + Voicemail license by CUWL when they are purchasing new ...
Hi All,Could you please look at the following debug output and the config and let me know why we are receiving two Calling party numbers for a single call but no called number?Thanks,The call comes in with two calling numbers (66244833104 and 6626564...
Hello,I have a 3925 router with 01 PVDM3-64 and 01 NM-HDV2-1T1/E1, all are brand-new and not configured. When I config the E1 pri-group timeslots 1-31, I got the message:"not enough DSP resources".I found that the NM-HDV2 can use DSP resource on rout...
We have 8.5 and see how to change the timer for the sofkey screens but our 7940/60 phones change in 3-4 seconds. i do not see a product specific setting on these types of phones for that setting. Is there a Global setting for those?ThanksKevin
Hello all,Yesterday we upgraded the firmware on our 8945's so that we could enable personal ringtones and background images.This morning I have created a background image the correct size as per the cisco website and for some strange reason it wouldn...
| User | Count |
|---|---|
| 6 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
