Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We have a shared line 1111 across 6 phones (7920, 7961G-GE, 7971)It shows off-hook symbol on the display and line button lights on, even though 1111 is NOT in use by any of those phones.I've checked if handset is off hook but nothing wrong.Maximum nu...
Hi,is it possible that in a region One main site (being used as SRST Site also) is connedted to CUCM 7. Other small offices in that specific region will connect to main site (using cme) . If we dont want to connect small offices to CUCM . What can be...
Hello AllI am trying to set up a cisco sip gateway to connect to a sip provider (Gamma)The sip gateway is connected to the communication manger as a sip trunkDoes anyone have a configuration example of how to do this or can point me to a doc on cisco...
Hello,In call manager 4.2(3) when change the firmware upload in device default for a phone (example the 7911) . All phones goes AUTOMATICLY to reload and upload the new firmware. I was sorprise in the client see how all phones go to reload and interr...
Hi,One Cisco phone consumes 3 license units to connecto to CUCM. If we have CME site acting SRST too. How many license unit will be consumed for one phone. In case, we are in active SRST mode, we need to have more license ? Thanks
hi,i need an help in making the boq for UC 560should we need to order license separately for phones or L-UC-PRO-8U= is enough
I have a networkPHONE1>>>CUCM1>>>GW1>>>>>GW2>>>>>>GW3>>>>>>GW4>>>>CUCM2>>>PHONE2Call 1 -When Phone 1 calls phone2 , Phone 1 can see the alerting name being sent back by phne 2Calls 2 -When Phone 2 calls phone 1, phone 2 does not see the alerting name...
We have a Cisco 2811 that is in between our RightFax Server and our Cisco 3845 Cube Router. We have SIP trunks but our provider is not T.38 compliant so that is why the 2811 was put in place. This has been in place for over a year without any troub...
Hi,I recently changed my subscriber to be my publisher after my publisher hardware failed. I uploaded the node licenses and DLUs on to the new publisher, however nothing registers. Please help..Regards,Benson
Hi all experts, I configure site to site vpn and currently soft phone can work from remote site to connect main site CME. But Hard phone still cannot work.This is basic network plan. Main Site ...
I have Cisco Unified Communications Manager Business Edition v8.5. I have a few questions about the integrated Unity Connection:1. I don't see any way to delete a mailbox once it has been created.2. You can set the warning size on a mailbox, but i...
Does cisco have any Doc. that list all the ports number that Voice over IP use ( all Kind of protocls for all product or the major products)Aprreciate if any one have any information to this kind of documents.
I'm using CallManager 8.0 to 8.6 and CIPC windowns 7. What's happening is that when I open the CIPC for the first time on the computer, it takes 4-5 minutes to register with CallManager. Does anyone know why it's taking so long to register?regards,
Hello, I have to add a 7916 expansion module to a 7965 phone on a UC560. What firmware do I need on the UC560 to support this module? I saw mention of B016-1-0-2.sbn here http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/c... . ...
We have to register some phones (7941), which have come to us form one of our labs set up years ago, to our CUCM 7.1.The issue is that trying to unlock the settings of them phones by doing **hash - its asking for an Authentication password. And we ha...
