Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We are currently running our CUBE on 2921 router with 3* (L-FL-CUBEE-100=) for 300 sessions. I am planning to upgrade the CUBE hardware to 4000 series (I have a spare) with the latest IOS to use it also for the Teams Direct Routing. Can I use the exi...
I have a Cisco phone cp-8861-3pcc with a sometimes working hook switch. The phone is 13 months old so its 1 month out of warranty and both Ring Central and Cisco want nothing to do with helping me with this repair. The phone was used less than 100 ti...
I am running cme server in router cisco 2921 source addres of cme server is 192.168.6.100 and there is no issue in registering sip phone connected through switch module. I want to extend sip phone through a wireless link at some distance and the link...
SIP trunk between CUCM 12.5 and VG310In and out bound calls are working to FXS ports on VG310 using SIP dial peersWhen VG310 port does a hook flash transfer VG310 sends a REFER then CUCM sends FORBIDDEN I am not sure why it I am getting the 403 messa...
Greetings, I am trying to add 7925 firmware, however for some reason there is conflicting tftp bindings. tftp-server flash:APPSH-1.4.8.4.SBN alias APPSH-1.4.8.4.SBN rftp-server flash:CP7925G-1.4.8.4.LOADS alias CP7925G-1.4.8.4.LOADS tftp-server flas...
is it possible to configure Hotline for FXS analogue CUCM SCCP.
Hi, i have one particular user who this effects. Everything seems to be set up correctly in the Call Manager and Unity. Internal calls DO go to voicemail, but external calls are routed to the standard cisco greeting, with no option to leave a voicema...
Hello everyone,I have setup a Cisco phone system with CUCM and an ASA so that we can have multiple 7945 phones remotely connected via AnyConnect VPN. The phones have been configured to use certificate based authentication for the VPN connection to t...
Hi. First off, I should state I don't generally have anything to do with VOIP-specific stuff, and my understanding of it is shaky at best. I've run into a situation where one of an organization's PRI gateways has an out-of-date default gateway. If i...
Hello Cisco Community,I have users in my corporate directory with and without extension. It is complicated for my end-user to locate who he is looking for since he can see an immense list of users and I want him to only display the list of users with...
Hi All, Is there anyone who knows for how to initial and answer a call from the CLI of 8945 and 8845? "dial dn" is the command for making a call from 8845, but i have not found how can i answer a call from 8845 and initiating a call from 8945. Th...
Hello, I need to add a new phone number that can be called from the outside of the customer's network. What I need? I have already added 1 translation pattern on the CUCM that says that the new phone number must redirect the call on a company phone T...
Hi all, I am trying to configure within CUCM a forward within office hours and then a different forward out of hours.DN is 4460in hours this needs to forward to 5888and out of hours this needs to forward to 4470 Could anyone help please ?
Hello,I'm having issues with the phones in the same cluster. It gets stuck to registering and gets rejected after the phone reboots.We successfully upgraded our CUCM from 11.5 to 12.5 a week ago.CUCM cluster filled up the active partition to 98% afte...
Hi all, if I have 2 CUCM servers, can I make 1 of the CUCM servers as publisher and subscriber and another CUCM server as subscriber? Or it can only be 1 publisher and 1 subscriber?Thanks.
