Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello, I have my voice gateway with 2 interfaces, one for the customer network and the other will be set in 2 sub interfaces. This 2 sub-interfaces will be to connect sip trunks to the PSTN. I would like to know if there's any special configuration I...
Looking for the command line to run a query that will return the MAC adddress, DN and number mask.
I have a few users that have been set up for softphone use and have installed the IP communicator software and set up the phone. It will work no issues they will shut down there PC and the next day log in and start the softphone software and it just ...
Hi guys, Please, would anyone know how to upgrade CUCM 11.0 to 11.5 is considered a version change, where it will be necessary to migrate the licenses through an active licensing agreement? Or, is it just a simple CUCM release update, with no license...
Hi all, I'm trying to get a Cisco 8851 and a 8841 (3PCC) fully working with my asterisk pbx.I've already configured almost all functionalities (BLFs, voicemail, regional settings, call fw, DND) but i'm having a problem with star codes.For example, fr...
cisco cme ukrtelecom 195.5.0.54Hello everybody!I try to configure SIP trunk without username and password.Situation 1) When I use my white IP on CME g0/0 port - everything is OK, calls are workingSituation 2) When I put CME behind NAT and configure p...
Dear Cisco users, We are migrating Analogue phone to CISCO 4W E&M solutions. Would you please let me know How much bandwidth on Cisco 4W E&M card uses when it is uncompressed?This bandwidth needs to include IP headers etc...The entire packet frameI ...
When the call is disconnected by the device to which the ATA 190 is talking to the ATA plays out a continuous busy tone. Cisco ATA 190 has the latest software version ATA190.1-2-1-004 installed and is configured in Cisco Unified Communication Manager...
Hi AllWhen building SIP trunks from my CUCM, we only have phones registered to 2 subscribers and not our pub.I see when calls are made across the trunk they come from the subscriber IP, never the publisher IP.What do you normally do here? is this nor...
Hi,I need some help. This is CUCM ver: 11.5(1) SU7. I have 3 new 8841 phones (currently on firmware 12-7-1-0001-393). Phones all have 3 lines:Line 1 Primary Line (not shared)Line 2 Hunt Group A Line 3 Hunt Group B (Hunt Group B is at a different...
For example, we have receptionist 1 that comes in at 8am, and a receptionist 2 at 12pm. I would like to create a schedule that assigns the main line to receptionist 1 at 8am, and removes it at 12pm. Currently I have to do this manually in CUCM. Is th...
Hi! Rookie here. Does anyone know if the 8861 IP Phone can use its Bluetooth technology to connect to the 8832 wireless microphones kit? I have a customer who wants to connect the 8832 wireless microphones to an 8861. -Beth
Hi all, I try to update and install LSC certificates on my CUCM 11.5, but there are 2 types of issues : 1/ after the csr have signed by the external CA, the CUCM import the LSC, extract and parse the .der, then when installing on the phone, still sta...
HiWe have Cisco UAC 11.1 installed. The docs call out for Java auto-updates to be disabled but other than that it does not specifically mention much. Would someone have any knowledge about Java updates being supported by the Attendant Console Server...
Hello Guys. I have a CUCM cluster with more than 200 branches and i want to know if there is an automatic way to push the certificates to CUBES? I appreciate your comments.
