Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Is there any way to program a softkey for anything other then the options given? I am using one of these phones as a doorway phone and want one of the button as a speeddial that they push to ring the receptionist.
Hi,We are trying to configure a sip gateway with the below configuration. The router is installed with 4 fxo ports which i am connecting to a pstn line with the config as below.dial-peer voice 10 pots destination pattern 9tport 0/0/0forward digits al...
hi, is there anybody implemented the such FAC or CMC to make external call at common sharing IP Phone (ie main Lobby). i read about the FAC and CMC can do this features but i'm not sure whether the code can used the individual PIN in global directory...
Hi;We have two VG224 and a 2801 router at a remote site. There is no ip phone at the site. We need solution like SRST. Anolog phones should be able to call each other and PSTN when WAN connection or CM failed. Can i achieve this goal?
Last night i upgraded to CM 5.1 from 5.0.4 and ever since then all internal calls have bad call quality. They almost sound too crisp which is causing it to crackle at times. Does anyone know how to change maybe the quality of the call or microphone l...
I have to change directory numbers on over 100 phones in CM 4.1. Is there a way to do this in BAT. Or do I have to do each one seperately?
I have a customer who has 6 (h323)analog lines and when dialed is PLARed which goes to AA, however when I dial the number it rings 2 times before the AA picks up. I even tried to attach an analog phone to lines and does the same thing.
HiI have a MCS 7815 with preloaded CCM 5.0 and 50 Cisco 7940 IP phones.With the basic configuration all 50 IP phones are communicating fine. My problem is, I am unable to activate the messages and "help ?" key. What configuration should I do in the C...
All, I have a 7960 phone that is fowarded to an analog port off a VG248. out CM, went down last night for unknown reasons and now the call is stuck in call forward. You can push the CFwdall button on the phone and the call forward goes away, but al...
I have a problem with corporate directory not displaying as part of the directory menu on some phones connected to 4500 Cisco catalyst switch.Scenario: I have one call manager cluster with eight (8) 4500 and seven (7) 6500 catalyst switches. All the...
Hi ExpertsHopefully a quick question! Within the CallManager 5.x model, how many devices license units are required for a VG224 and VG248 respectively? The ATA186 is listed as 2DLUs within the documentation, but I cannot find anything about require...
Upgrading the 7941-61 firmware to version 8.2.2 causes the Missed Call list to be inverted. The list is suppose to show the last call received first in the list. If you upgrade the firmware, it shows the last call received in the bottom of the list...
i have a cisco voice router and legacy pbxin my site 1.I have connected 12 pstn analog lines from ISP and 20 anlog phones to this legacy PBX.Now i have to connect this PBX to my cisco voice router 2811 .I dont have E1/T1 or E&m in my Legacy PBX.i ha...
So CCM4.2.3, client wants to have a line group of 3 DN's that will answer a phone, but if not answered or all busy it should forward to a voicemail box.How is this accomplished? I tried making a 2nd line group with a DN that CFA to voicemail, but th...
Hi, I've got to modify the configuration on one of my customers CME's. They would like the users in their campus to dial 0 and be passed to main reception. I've thought of doing this by creating a translation rule, translating 0 to 1200(main receptio...
