Hi experts ,
I wanted to know if it is possible to check the time that this operator in the state "emergency" (F10).
The emergency routes the call to a CTI and the Unity into a mailbox .
Thanks for the help
Greetings,
Hi Everyone,
My customer are using the BE6K Release 10.5 (CUCM, IM & Presence, Expressway C&E) with domain customerABC.com for Jabber to login from internet, now they would like to add new BE6K (separate system). Please help me to design for customer...
Hi, when attempting to install firmware to a subscriber node / TFTP server, I receive an error message: "A valid upgrade file must be provided before an upgrade can be started."
I'm using the file "cmterm-dxseries.10-2-5-154.k3.cop.sgn" I am runnin...
All,
I have a lab setup at home built on ESXi with a fairly decent spec... Any ideas why the CUCM Web GUI takes so long to load?
When it does respond I get this:
HTTP Status 404 - /ccmadmin/showHome.do
type: Status report
message: /ccmadmin/showH...
Hi,
I am trying to get presence working on Cisco Unified Attendant Console Advanced with IM&P/Jabber
From the IM&P SIP Proxy logs I see SUBSCRIBE messages coming in with the correct sip uri/jabberid:
16:06:28.401 |PID(18011) sip_protocol.c(6330) Re...
I'm trying to do some interclusering (They are Unified Presence v11 and some v10) anyway some of them will say the peer isn't compatible, and when I look this up it points to there not being a user location table. How do I configure that?
I did co...
I am needing to activate the service Certificate Authority Proxy Function. Does anyone know if this will reset all phones in the cluster to download the updated ITL file or will I have to manually reset them?
Hi,
I'm planning a new BE6000 Medium implementation. While I need the CUCM and Unity, I'm not certain that I need IM&P, and in it's place I'd like to add the Telepresence Server to give some multiparty MCU-like functionality to video conferences.
T...
Hi,
can anyone tell me if the the serial cable on the VG248 can use for VG224 as we are replacing the VG248 analogue vgw. VG248 is not supported on CME.
Thanks.
Hi All , we have configured voicemail for our reception phone and recorded a personal greeting , everything is working fine but when users call and call is not answered first Cisco default Voicemail is heard then our recorded greeting. i have checked...
Hi everyone. We are using a call recording application to record calls using SPAN. Everything works fine, but there's a problem when we use hunt groups. If we call a Hunt pilot (which is configured correctly) the call is not recorded. It seems the R...
Hello AllSure there is a quick answer to this one, we are transferring calls from our CCX system to a hunt pilot number of 00000002.The line group of 00000002 contains six separate DN's to which the calls is presented using the longest idle algorithm...
Hi All,
Recently I have built 2 UCS B200 M4 module in our Datacenter .currently ESXi6 .0 is running on the servers . I want to monitoring motherboard Front and Rear Temperature . Can some one help me threshold value and operating temperature and t...
I am dialing into one of the site from my cellphone. For example the phone number to reach the site is 214 234 1234 and I can reach the site.
But I don't find any translation rules in the call manager or the router that translates the number 214 234 ...
